Whenever you have problem on your tie rod bushing, the Moog tie rod bushing is a great replacement to your old one. Since tie rod is a part of your vehicle steering and suspension system, you will easily know if there is a problem on your tie rod whenever you encounter a big difference on your driving quality. There are two sets of bushings that contribute to this problem. The first one is the steering rack hold down bolt bushings and secondly, the inner tie rod bushings. Most vehicles have steering racks that use clamps to hold the steering rack down. These clamps are also rubber bushings and it racks itself to help isolate the vibration coming from your steering wheel. When these rubber bushings wear out, then the rack can shift left or right, even if the clamp or hold down bolts are in place.
All vehicle steering racks uses two center mounted bolts to hold the inner tie rods to the steering rack. The inner tie rods have metal/rubber bushings or known as simply tie rod bushing, which are pressed into the end, and which the rack bolts are inserted through. If this tie rod bushing worn out or are lost, the inner tie rods can float on the bolt, also leading to sloppy steering.
Since the steering system is one of the most important safety systems on your vehicle, it is more advisable to never attempt to fix or replace any steering component, unless you are qualified and competent in this area of vehicle repair. If it is positive from any damage, it is a must that you look as soon as possible for its replacement. 0Whenever you are looking for a replacement, certainly you are also looking for Moog tie rod bushing. And this component is available here at Parts Train.
Use our Part Fit Checker to view parts compatible with your vehicle.