Hurst Line Lock

Anybody who has ever done a burn out can appreciate more the benefits that a line lock can give. Using a button to control the front brakes does not only make it easier for the rear brakes, but also makes the controlling of the vehicle much easier. Usually, the addition of a line lock can mean the difference between winning and losing. A line lock is basically an electronic solenoid that controls a valve that is line with the front brakes. Normally, the valve stays open and permits the fluid to pass through to the front brakes as usual. But while the front brakes are applied and the solenoid is switched on, the valve closes to trap the fluid in the front brakes keeping them applied until the control is released. It is a simple process that needs a very straight forward installation. And also with its relatively low cost, it is something that just about any racer should consider.

The Hurst line lock is among the best line locks there is in the automotive market. Hurst's original line lock roll control provides a positive locking action to the front wheels. It is primarily used in drag racing for more effective burn outs and starting line roll prevention. When you install this performance part, a modification to the brake hydraulic system is required. The Hurst line lock is made from high quality materials that guarantee the long service life of the product. If you are looking for a line lock brand that you can truly trust, then get the Hurst line lock. The part is engineered to give you the best possible performance that it can give you.

If you are looking for the best deals of Hurst line locks, we can help you with that. Here at Parts Train we offer the Hurst line locks at incredibly low prices. With our Hurst line locks, you can have the best quality product at affordable prices. Give your vehicle the quality performance parts that it deserves; get the Hurst performance parts only here at Parts Train.

Featured Products Brake Line Lock HURST UNIVERSAL ROLL CONTROL KIT - Includes solenoid valve, snap-action switch, indicator light, 4-amp fuse, mounting screws, and installation instructions; Provides positive locking action to the front wheels; Features advanced quality design stainless steel valve assembly for ultimate corrosion resistance; Fully enclosed epoxy molded electrical coil for reliability; With attractive finned aluminum housing and wider lightweight base that helps dissipate heat and provides better mounting stability; 150 micron screen filtered ports to prevent contamination; Field serviceable for cleaning or rebuilding; Has extra threaded port for separate bleeder or brake line pressure gauge; For 12-volt negative ground systems only. Brand: Hurst Price: $144.35 Brake Line Lock Solenoid B&M LAUNCH CONTROL SOLENOID -- The choice for performance and dependability; Primarily used as a brake locking device for drag racing or as a hill holding device for street use; Provides the brake holding capacity to the front or rear brakes; Can handle pressure spikes up to 1500 psi or maintain constant pressure of up to 400 psi; Works with 12 and 16 volt systems and other B&M switches; Easy installation. Brand: B&M Price: $44.17 Brake Line Lock B&M LAUNCH CONTROL, WITH INSTALLATION KIT -- Installation kit includes in-dash line fuse assembly, indicator light, aluminum switch mount, and button switch; The best choice for performance and dependability; Provides positive locking action to the front or rear wheels; Primarily used as a brake locking device in drag racing or as a hill holding device for street use; Works with 12 and 16 volt systems and other B&M switches. Brand: B&M Price: $81.02