If you turn the key of your vehicle and nothing happens, you may have just found that the fuel pump in your vehicle is dead. In our online catalog, we have the Delphi fuel pump, which is compatible with many vehicles. The fuel pump sits in the gas tank and pushes fuel towards the engine. Failure is usually the result of worn armatures, which transmit the electrical power to the moving parts of the motor, though it is possible that contaminants in the fuel may have worn the physical motor down. The Delphi fuel pump is designed to be a direct replacement for the original unit, and it is made to the highest industry standards. Before installing the new Delphi fuel pump, there are a number of safety precautions that should be taken beforehand. First, the work area should be outdoors. The fuel tank should be drained of all fuel and the vehicle should be supported on jack stands. In order to prevent any dangerous sparks, the battery must also be disconnected prior to installing the Delphi fuel pump. Lower the tank gently with a jack stand until the electrical and fuel connections can be disconnected, then remove the tank. Carefully take the old unit out, replace it with the Delphi fuel pump, and put the vehicle back together. Once installed, the Delphi fuel pump will last at least as long as the original unit did, and it comes with a full warranty from the manufacturer. On many vehicles, there is a second pump designed to keep the pressure high, and if it needs to be replaced, we also have the appropriate Delphi fuel pump in stock to complete the task. Order your Delphi fuel pump today, either online or by toll free telephone number, your vehicle will be running again soon.
Use our Part Fit Checker to view parts compatible with your vehicle.