Order toll-free 1-888-251-1214
 
HACKER SAFE certified sites prevent over 99.9% of hacker crime.

BBK Fuel Rail


Get the right BBK Fuel Rail from Partstrain! Select your vehicle to ensure that you will find the right parts with a perfect fit.


 



Home > Shop By Brand > BBK > Fuel Rail


Featured Subbrands

  • Air Filter
  • Camber Kit
  • Clutch Cable
  • Clutch Quadrant Kit
  • Coil Spring Spacer
  • Cold Air Intake Mounting Bracket
  • Control Arm Kit
  • Fuel Pressure Regulator
  • Fuel Pump
  • Fuel Pump Kit
  • Gauge Face
  • H Pipe
  • Header Gasket
  • Headers
  • Intake Manifold
  • Intake Manifold Cover
  • Intake Manifold Gasket
  • Intake Manifold Kit
  • Intake Tube
  • Lowering Kit
  • MIL Eliminator Set
  • Oxygen Sensor Extension
  • Performance Pulleys
  • Pinion Snubber
  • Shifter
  • Subframe Connector Brace
  • Subframe Connectors
  • Throttle Body
  • Throttle Body Spacer
  • Valve Cover
  • X Pipe
  • A conduit line that delivers the fuel from the distributor to the fuel injectors of the fuel system is called the fuel rail. The fuel rail like the BBK fuel rail transports the fuel with a certain flow rate as well as pressure from the fuel chassis line through the fuel injectors. This line is filled with a pressurized fuel that flows from the fuel pump. It also works in connecting the fuel injectors to the multipoint fuel injected system. Its diameter is about ¾ inches that acts independently in allowing the constant flow of fuel along the fuel injectors.

    Aside from that, the fuel rail also works in maintaining the position of the fuel injectors in order to correct the spray pattern of the fuel along the valve intake. It also uses a pocket or seat that is found in every injector including an inlet that allows the fuel supply. In some fuel rail designs, a fuel pressure regulator is also incorporated. . To ensure an efficient delivery of the fuel, the fuel rail must be consistent with the size of the hose. It can also be much larger with the hose size to aid in dampening the pulsations that is produced by the fuel injectors which ensures the even distribution of fuel in any conditions.

    Maintaining the condition of the fuel rail is important in order to provide a sufficient amount of fuel delivery in the system. So that means that if ever you experience some trouble with such, you have to replace it immediately with a new one to restore its functions. Getting the BBK fuel rail is not that hard when you check out Parts Train catalog. Here, a wide array of car products and accessories awaits you. All are guaranteed to be of best quality and performance.

    Featured Brands

  • AFE
  • APC
  • APG Compressors
  • ATS
  • Aftermarket
  • Agricover
  • Aimco
  • Air Lift
  • Airaid
  • Airtex
  • Akebono
  • AllView Mirror
  • American Racing
  • Ansa
  • Apexi
  • Autoloc
  • Autometer
  • Autotecnica
  • B&G
  • B&M
  • BAK
  • Backrack
  • Baer
  • Banks
  • Battery Brain
  • Bedrug
  • Behr
  • Bendix
  • Best Electronics
  • Bestop
  • Better Built
  • Big Game
  • Bilstein
  • Blue Print
  • Body Armor
  • Borla
  • Bosal
  • Bosch
  • Brembo
  • Brembo Sport
  • Bulldog Security
  • Bullett
  • Bully Dog
  • Bushwacker
  • C2C Wheels
  • CCP
  • California Car Duster
  • Carrand
  • Carriage Works
  • Catco

  • Featured Products
    Fuel Rail
    AEM HIGH VOLUME FUEL RAIL, ANODIZED CLEAR -- Features A 1/2" Fuel Bore To Support Fuel Flow For Applications Up To 1,000 Horsepower, This Large Bore Also Dampens Backpressure Pulses Created By Larger Injectors And Works Perfectly With Stock Injector Sizes, An Additional 1/8 NPT Port Is Included To Accommodate A Nitrous Set-Up Or Fuel Pressure Gauge, A Custom Fuel Line Fitting Is Also Included For The Factory Fuel Line, Comes With Rail Ends That Are Pre-Tapped To Accept -6 AN Or 9/16" x 18" Fittings For Custom Fuel Lines, Its OE Fuel Pressure Regulator Or AEM Adjustable Fuel Pressure Regulator Is Mounted Directly To Rail With No Modifications Needed, Additional Parts Not Required For Installation, With AEM's Limited Warranty
    • Brand: AEM
    • Type: Direct OE Replacement, Clearance
    Price: $109.56
    Fuel Rail
    AEM HIGH VOLUME FUEL RAIL, ANODIZED BLUE -- Features A 1/2 in. Fuel Bore To Support Fuel Flow For Applications Up To 1,000 Horsepower, This Large Bore Also Dampens Backpressure Pulses Created By Larger Injectors And Works Perfectly With Stock Injector Sizes, An Additional 1/8 NPT Port Is Included To Accommodate A Nitrous Set-Up Or Fuel Pressure Gauge, A Custom Fuel Line Fitting Is Also Included For The Factory Fuel Line, Comes With Rail Ends That Are Pre-Tapped To Accept -6 AN Or 9/16 in. x 18 in. Fittings For Custom Fuel Lines, Its OE Fuel Pressure Regulator Or AEM Adjustable Fuel Pressure Regulator Is Mounted Directly To Rail With No Modifications Needed, Additional Parts Not Required For Installation, With AEM's Limited Warranty
    • Brand: AEM
    • Type: Clearance
    • Color: Blue
    Price: $135.38
    Fuel Rail - Gunmetal
    AEM HIGH VOLUME FUEL RAIL, GUNMETAL, BLACK -- 50-state legal; Includes comprehensive installation instructions, hardware, fittings, and injector O-rings; With additional 0.125 npt port to accommodate a nitrous set-up or fuel pressure gauge; Features a 0.5 in. fuel bore to support fuel flow for applications up to 1,000 horsepower; This large bore also dampens backpressure pulses created by larger injectors and works perfectly with stock injector sizes; Has a custom fuel line fitting for the factory fuel line; Its rail ends are pre-tapped to accept negative 6 AN or 0.5625 in. x 18 in. fittings for custom fuel lines; Has OE fuel pressure regulator or AEM adjustable fuel pressure regulator that is mounted directly to rail with no modifications needed; Made for top feed Bosch style fuel injectors with small O-ring cross section diameter; Without provision for the O.E. fuel pressure regulator; An adjustable fuel pressure regulator such as the AEM part number 25-302 must be used with this fuel rail; With AEM's limited 12-month warranty.
    • Brand: AEM
    • Material: Gunmetal
    • Type: Direct OE Replacement
    • Color: Black
    Price: $241.20
    Fuel Rail - Anodized Red - Aluminum
    AEM HIGH VOLUME FUEL RAIL, ALUMINUM, ANODIZED RED -- 50-state legal; Includes comprehensive installation instructions, hardware, fittings, and injector O-rings; With additional 0.125 npt port to accommodate a nitrous set-up or fuel pressure gauge; Features a 0.5 in. fuel bore to support fuel flow for applications up to 1,000 horsepower; This large bore also dampens backpressure pulses created by larger injectors and works perfectly with stock injector sizes; Has a custom fuel line fitting for the factory fuel line; Its rail ends are pre-tapped to accept negative 6 AN or 0.5625 in. x 18 in. fittings for custom fuel lines; Has OE fuel pressure regulator or AEM adjustable fuel pressure regulator that is mounted directly to rail with no modifications needed; Additional parts not required for installation; With AEM's limited 12-month warranty.
    • Brand: AEM
    • Finish: Anodized Red
    • Material: Aluminum
    • Type: Direct OE Replacement
    Price: $139.66
    Fuel Rail
    AEM HIGH VOLUME FUEL RAIL, ANODIZED BLUE -- Features A 1/2 in. Fuel Bore To Support Fuel Flow For Applications Up To 1,000 Horsepower, This Large Bore Also Dampens Backpressure Pulses Created By Larger Injectors And Works Perfectly With Stock Injector Sizes, An Additional 1/8 NPT Port Is Included To Accommodate A Nitrous Set-Up Or Fuel Pressure Gauge, A Custom Fuel Line Fitting Is Also Included For The Factory Fuel Line, Comes With Rail Ends That Are Pre-Tapped To Accept -6 AN Or 9/16 in. x 18 in. Fittings For Custom Fuel Lines, Its OE Fuel Pressure Regulator Or AEM Adjustable Fuel Pressure Regulator Is Mounted Directly To Rail With No Modifications Needed, Additional Parts Not Required For Installation, With AEM's Limited Warranty
    • Brand: AEM
    • Type: Direct OE Replacement
    • Color: Blue
    Price: $139.66


    Bill Me Later