Pontiac Ventura Parts

The Pontiac Ventura is one of the most under rated General Motors’ car of all time. No wonder, many don’t know the car nowadays, much as they were never really popular during their time. And while not much is mentioned about the car, it is a bit surprising that there were actually two distinct cars that used the Pontiac Ventura name. Unluckily, neither of the cars became popular.

The first of the two Pontiac Venturas was introduced in 1960 and was manufactured and sold only for two model years. It was a mid-size car in the form of a 2-door hard top coupe. The car is not very popular and can hardly be a classic or an antique with the current classification standards. The car is plainly old and rare. And just as many other unpopular and old cars, one would expect that restoration and replacement parts for it are rare and hard to find.

The second Pontiac car that used the Pontiac Ventura nameplate lasted a bit longer than the first. It was introduced in 1971 and was manufactured and sold through the 1977 model year. The car even had a redesign before entering the 1975 model year. It was a clone of the Chevrolet Nova and sold as an entry-level Pontiac car along with other GM siblings like the Oldsmobile Omega and the Buick Apollo. In 1975, the Pontiac Ventura, along with its other GM siblings, was given a redesign and was fitted to the new GM X-body platform.

While the second of the two Pontiac Ventura models lasted longer than the first, it was neither a success. The Pontiac Ventura, along with the other X-cars, was considered as a failure by the General Motors engineering team, that’s why the X-body platform was retired shortly after few years of use. The X-body platform proved to be a poor design and caused too much problems to the cars that used the body style.

With neither of the two Pontiac Ventura car models showing valuable characteristics, both became unpopular and has no chance to be considered as a classic. Nonetheless, it is always good that such old cars be used rather than be permitted to decay in your garage. For your old Pontiac Ventura to perform better, equip it with high quality Pontiac Ventura parts. Here at Parts Train, we offer just that. And we offer it in the most convenient way for all Pontiac Ventura car owners—through the Internet. Just browse through the Parts Train website and easily find for yourself each and every Pontiac Ventura part you would need for your repair and restoration job. You can also call us if you need any assistance in choosing the best Pontiac Ventura auto mechanical and body parts for your car.

Featured Products

Radiator - Aluminum Core, Plastic Endtanks

RADIATOR, 3-ROW -- 26.25 in. x 17 in. x 1.87 in. core size, 1.31 in. inlet size, 1.56 in. outlet size, 2-3/4 in. x 18-5/8 in. top header, 2-3/4 in. x 18-5/8 in. bottom header, soler on core, top left inlet location, bottom right outlet location; With transmission oil cooler; Without engine oil cooler; A high quality, direct fit OE replacement radiator; Covered by a 1-year unlimited mileage warranty.

Brand: Replacement
Material: Aluminum Core, Plastic Endtanks

Ultimax Brake Pad Set - Semi-metallic

EBC ULTIMAX BRAKE PAD SET -- R90 tested and approved; Made from premium quality friction material with part metallic content to greatly reduce chances of brake vibration and improve braking performance; Features EBC Brake-In surface coating that provides instant brake efficiency on installation, eliminates the need for installer to bed-in the brakes after fitment and conditions rotor surface to remove glaze and scale; Shimmed, chamfered, and slotted to prevent heat expansion cracks and to reduce brake noise; With unique powdercoated finish on both pad and back plate giving lifetime resistance to corrosion and preventing moisture ingress; Produces minimal dust and is the perfect choice for the urban or daily driver; Recommended for sedans, light trucks and SUVs; With EBC's limited 1-year or 10,000-mile warranty.

Brand: EBC
Location: Front
P_condition: Install These Brake Pads With The Help Of EBC's Instructional Video P/N E35DVD083 - Sold Separately
Material: Semi-metallic
Series: Ultimax

Redstuff Ceramic 3000 Brake Pad Set - Ceramic

EBC REDSTUFF CERAMIC 3000 SERIES BRAKE PAD SET -- Made from high quality Kevlar fiber-based compound that is enhanced with ceramic particles; Features EBC Brake-In surface coating that provides instant brake efficiency on installation, eliminates the need for installer to bed-in the brakes after fitment and conditions rotor surface to remove glaze and scale; Shimmed, chamfered, and slotted to prevent heat expansion cracks and to reduce brake noise; Strong resistant to fade under load and totally resistant to rotor vibration; Reduces dust by 60 to 90 percent and can be removed easily; Superb brake effect from cold up to race temperature; Engineered for highly tuned vehicles and best for high-speed spirited street driving; With EBC's limited 1-year or 10,000-mile warranty.

Brand: EBC
Location: Rear
P_condition: Install These Brake Pads With The Help Of EBC's Instructional Video P/N E35DVD083 - Sold Separately
Material: Ceramic
Series: Redstuff Ceramic 3000

Ultimax Brake Pad Set - Semi-metallic

Brand: EBC
Location: Rear
P_condition: Install These Brake Pads With The Help Of EBC's Instructional Video P/N E35DVD083 - Sold Separately
Material: Semi-metallic
Series: Ultimax

Ultimax Brake Pad Set - Semi-metallic

Brand: EBC
Location: Front Or Rear
P_condition: Install These Brake Pads With The Help Of EBC's Instructional Video P/N E35DVD083 - Sold Separately
Material: Semi-metallic
Series: Ultimax

1977, 1976, 1975, 1974, 1973, 1972, 1971, 1961, 1960