Acura CL Water Pump |
 |
|
|
|
|
|
|
|
|
|
|
|
|
Home >
Shop By Department >
Water Pump >
Acura >
Acura CL Water Pump |
|
Acura CL Water Pump |
When it comes to your car, preventing any damage and deterioration can be done through proper maintenance of all the parts and accessories. Keeping the car parts in their good conditions will absolutely spare you from expensive repairs and replacements. When we talk of maintenance, it is always associated with repairs and even replacements. Cleaning, customization, tune ups and check ups, repairs and replacement are worth your time, effort and investment. But, replacement can do even better. Replacements might mean additional expense but try to consider the various advantages that it can do to your car.
For any automobile, overheating is such a common problems. Overheating usually happens when the cooling system becomes unsuccessful in doing its important role. The severe heat from the engine is thrown away through the cooling system. Aside from that, the cooling system makes the engine operate at the most suitable temperature and gets the engine up to the right temperature right after it activate. At the most, the cooling system is the one responsible for controlling the increasing temperature of the vehicle engine as when it starts to operate by making the coolant freely circulate along the vehicle’s engine block and out of the radiator when the engine arrives at its operating temperature. In this way, engine overheating is greatly prevented.
The engine block, bypass hose, expansion tank, fan pulley, fan clutch, heater core, fan, heater return hose and supply hose, hose clamp, heater or AC blower motor, upper and lower radiator hose, thermostat housing, radiator and cap and water pump are essential parts of the cooling system The water pump is one of the mentioned parts of your Acura CL cooling system. It is a mechanical or electrical apparatus that is responsible for pumping and circulating the coolant or water in the cooling system. There are various designs of the water pump but it contains a standard rotating impeller to drive the coolant along the engine block. Water pumps are provided with spring-loaded seal to eliminate the leakage of coolant or water around the shaft. Modern water pumps are provided with pre-packed bearings sealed on both ends to stay away from frequent lubrication. The Acura CL water pump is capable of functioning accurately by having a high-flow design making way for lesser cavitation. High quality water pumps require minimum power to operate, thus maintain the engine life.
If your car suffers from inefficient water pump, refer to Partstrain. This site will bring you top of the line Acura CL water pump. More than that auto part, we have a wider selection of auto components and add-ons that you will surely want for your luxurious car. Wait no more. Come to Partstrain now and get hold of our performance auto parts. The most affordable and high quality auto parts are only here at Partstrain.
|
|
 Featured Products |
Acura CL - Water Pump
"AIRTEX WATER PUMP ASSEMBLY -- 100 % Tested, Features All New OE-Matched Support Rods For Proper Pump Tensioning And Alignment, Now With Improved Vehicle Harness Connector That Eliminates Known OEM Design Flaw, Upgraded Seals Ensure Constant Pressure And Superior Performance, Designed Ceramic Card Reader For Accurate Fuel Gauge Readout, OE-Matched Float Arm Wire Gauge Ensures Proper Fuel Level Readings, Rubber Isolator Feet Offers Improved Noise Dampening Over OE Design, Exclusive Gradient Density Strainer Design Offers Superior Contaminant Filtration, With Airtex's 12-Month Warranty"
- 1997 - 4Cyl 2.2L "Gas, FI, F22B1" Base
- 1997 - 4Cyl 2.2L "Gas, FI, F22B1" Premium
- 1998 - 4Cyl 2.3L "Gas, FI, F23A1" Base
- 1998,1999 - 4Cyl 2.3L "Gas, FI, F23A1" Premium
|
Acura CL - Water Pump
"AIRTEX WATER PUMP ASSEMBLY -- Water Pump Assembly, OEM Quality, Look And Performance"
- 1997,1998 - 6Cyl 3.0L "Gas, FI, J30A1" Base
- 1997,1998,1999 - 6Cyl 3.0L "Gas, FI, J30A1" Premium
- 2001,2002,2003 - 6Cyl 3.2L "Gas, FI, J32A1" Premium
- 2001,2002,2003 - 6Cyl 3.2L "Gas, FI, J32A2" Type-S
|
Acura CL - Water Pump
There have been a few comments re the gasket packed with the Paraut version of this pump being of a softer density than the OE gasket. Tests by Atsugi (Paraut's parent company) have not shown any problems, but they advise that that torquing the attaching bolts to the proper spec is critical on this application for proper sealing. For those who prefer a different gasket, we also offer #19222-PT0-300 (made by Ohtsuka, the OE supplier), which can be ordered separately..
- 1997 - 2.2L L4
- 1997,1998,1999 - -Cyl -L
- 1998,1999 - 2.3L L4
|
Acura CL - Water Pump
"BECK-ARNLEY WATER PUMP, NEW -- A High Quality, Direct-Fit OEM Replacement Water Pump"
- 1999 - 4Cyl 2.3L "Gas, FI, F23A1" Premium
|
Acura CL - Water Pump
"BECK-ARNLEY WATER PUMP, NEW -- A High Quality, Direct-Fit OEM Replacement Water Pump"
- 1999 - 6Cyl 3.0L "Gas, FI, J30A1" Premium
- 2001,2002,2003 - 6Cyl 3.2L "Gas, FI, J32A1" Premium
- 2001,2002,2003 - 6Cyl 3.2L "Gas, FI, J32A2" Type-S
|
|
|
| 2003, 2002, 2001, 1999, 1998, 1997 |
|
|
|
|
|
|
|
Back to Top
