Turn Signal Light
PACER LED MIRROR OR REAR WINDOW MOUNTED TURN SIGNAL BLINKERS -- This Light Kit Provides Maximum Visibility Using Two 2 x 2 x 5/8 in. LED Lights, Easy Press-On Installation And Simple 2-Wire Hook Up, Wiring Harness Included
|
Turn Signal Mirror Module
MUTH MIRROR BRAKE MODULE KIT -- Designed To Work With Muth Signal Mirror Glass Kits, This Kit Enables A Steady-On Lighted Chevron Feature In Both Side Mirrors When The Brakes Are Applied, The Brake Module Is Designed To Be Mounted Underneath The Dashboard Or Behind The Side Floor Kick Plate, Kit Includes One Brake Module With Wire Harness, Five Wire Taps, Three Pieces Of Double-Sided Foam Tape, One Nylon Cable Tie, And Installation Instructions, 3 Year Limited Warranty
|
Turn Signal Mirror Module
MUTH MIRROR MULTIFUNCTION MODULE KIT -- Designed To Work With Muth Signal Mirror Glass Kits, In Addition To The Standard Turn Signal Function, The Multifunction Module Adds (1) A Strobing Reverse Alert IE, When A Vehicle Is In Reverse Gear The Strobing Reverse Alert Will Appear As Rapidly Flashing Chevrons In Both Rearview Mirrors, This Makes It Evident To Surrounding Drivers And Pedestrians That The Vehicle Is Backing Up, (2) Brake Signal - When The Brakes Are Applied This Feature Enables A Steady-On Lighted Chevron In Both Side Mirrors, If A Turn Signal Is Being Used At The Same Time As The Brakes, A Flashing Chevrons Will Appear Only In The Corresponding Side Mirror And The Brake Signal Remains Steady On In The Opposite Mirror, (3) Door Open Alert - A Chevrons Signal Flashes Quickly In Both Mirrors When The Fourth Door Is Open Or Can Be Connected So When Any Door Is Open The Chevrons Flash, This Is Particularly Important For Minivans Where Children May Jump Into The Roadway From The Door Behind The Driver, (4) Alarm Tick Alert - A Single Rapid Chevrons Signal Flashes Every Five Seconds In Both Rearview Mirrors When This Feature Is Activated, The Alarm Tick Is Designed To Work Either With A Vehicle's Existing Alarm System Or Can Simulate One, Kit Includes One Multifunction Module, Input Harness Wires With Connector, Sixteen Splice Connectors, And Installation Instructions, 3 Year Limited Warranty
|
Turn Signal Mirror Module
MUTH MIRROR HEATER CONVERSION KIT -- This Kit Is Used In Conjunction With Muth Heated Signal Mirrors To Enable The Heater Option On A Retrofitted Application, A Switch Is Used To Activate The Heaters, It Can Be Mounted On The Dashboard For Easy Access, When The H-Mod Switch Is Activated, It Lights Up And A Timer Begins, After Ten Minutes The Heater Automatically Shuts Off And The Lighted Switch Flashes, If Extra Heating Is Needed, The Heater Can Be Reactivated For An Additional Ten Minute Timed Session, Kit Includes Wire, Connectors, And Installation Instructions, 3 Year Limited Warranty
|
Turn Signal Mirror Glass
MUTH SIGNAL MIRROR KIT -- This Is A Safety Accessory That Is Mounted Directly To The Exterior Mirror For Expanded Visibility, It Has Dual Function As It Is Both A Fully Functional Signal Mirror As Well As A Convex Mirror, This Has Red Chevrons And Measures 3 In Diameter, One Left And One Right Hand Wide Angle Signal Mirror Assembly, Wire, Connectors, And Installation Instructions, If The Vehicle Has Electrochromic (Ec Or Self-Dimming) Exterior Mirrors, That Feature Will Be Lost With Signal Mirrors, All Kits Use Red Leds Unless Otherwise Noted, Heated Mirror Applications Replace Factory Installed Heated Mirrors, All Retrofit Kits, Except 220-0235-0/H And Unless Otherwise Noted, Require Factory Installed Power Mirrors To Complete Installation, 3 Year Limited Warranty
|
