Renault Tie Rod |
The Renault tie rod is a part of the steering mechanism in your Renault model. This performance part connects the center link to the steering knuckle on vehicles with conventional suspension systems and recirculating ball steering gears. In automobiles having the MacPherson strut suspension and the rack and pinion steering gears, the tie rod connects the end of the rack to the steering knuckle. Your Renault tie rod consists of an inner and an outer end. Together with the ball joints, the tie rod ends in your auto will make sure that your vehicle will steer left and right while it is hitting bumps and potholes that might cause the wheels to travel up and down.
What the tie rod of your vehicle effectively does is transmit the force from the steering center link or the rack gear to the steering knuckle, thus making the wheels turn. The outer tie rod end connects with an adjusting sleeve, which then allows for the adjustability of the tie rod’s length. Oftentimes, the length of the tie rod can be altered, basically for alignment purposes. The tie rod, together with the ball joint, will also see to it that the wheels are held firmly intact. As you will note, the Renault tie rod is one integral part of your vehicle’s steering system as this component helps turn the wheels of your Renault. So when you have a failing tie rod in your vehicle, you can just imagine the inconveniences that you have to endure while you drive.
Just like any other component, the tie rod will also wear down and loosen after a time, thus affecting the overall performance of your auto. Some of the key signs to look out for to diagnose when the tie rod is failing are drifting tires, irregular steering, and an unwarranted tire wear. When you experience this in your vehicle, make sure that you immediately check the problem and go for a replacement when needed. Also do take note that it is important that you get your vehicle a wheel alignment after replacing your stock tie rod since installing a new one will upset the toe setting.
And if ever you need a quick replacement to your failing and stock tie rod, they are widely available in the market right now. Parts Train is one site that offers a wide selection of tie rods and other parts for your Renault. So do not waste time; get your replacement Renault tie rod from Parts Train and continue driving with confidence.
|
|
 Featured Products |
Renault Encore - Tie Rod End
"MEVOTECH TIE ROD END, OUTER, FRONT, SOLD INDIVIDUALLY -- A High Quality, Direct Fit OE Replacement Tie Rod End"
- 1984 - 4Cyl 1.4L "Gas, FI, VIN "D" GS
- 1984 - 4Cyl 1.4L "Gas, FI, VIN "E" GS
- 1984 - 4Cyl 1.4L "Gas, FI, VIN "E" LS
- 1984 - 4Cyl 1.4L "Gas, FI, VIN "E" S
- 1984,1985 - 4Cyl 1.4L "Gas, FI, VIN "D" Base
- 1984,1985 - 4Cyl 1.4L "Gas, FI, VIN "E" Base
- 1984,1985,1986 - 4Cyl 1.4L "Gas, FI, VIN "D" LS
- 1984,1985,1986 - 4Cyl 1.4L "Gas, FI, VIN "D" S
- 1985,1986 - 4Cyl 1.7L "Gas, FI, VIN "A" GS
- 1985,1986 - 4Cyl 1.7L "Gas, FI, VIN "A" LS
- 1985,1986 - 4Cyl 1.7L "Gas, FI, VIN "A" S
- 1986 - 4Cyl 1.7L "Gas, FI, VIN "A" Electronic
- Show All Applications
|
Renault Encore - Tie Rod End
"MEVOTECH TIE ROD END, OUTER, FRONT, SOLD INDIVIDUALLY -- A High Quality, Direct Fit OE Replacement Tie Rod End"
- 1985 - 4Cyl 1.4L "Gas, FI, VIN "D" Base
- 1985 - 4Cyl 1.4L "Gas, FI, VIN "E" Base
- 1985,1986 - 4Cyl 1.4L "Gas, FI, VIN "D" LS
- 1985,1986 - 4Cyl 1.4L "Gas, FI, VIN "D" S
- 1985,1986 - 4Cyl 1.7L "Gas, FI, VIN "A" GS
- 1985,1986 - 4Cyl 1.7L "Gas, FI, VIN "A" LS
- 1985,1986 - 4Cyl 1.7L "Gas, FI, VIN "A" S
- 1986 - 4Cyl 1.7L "Gas, FI, VIN "A" Electronic
- Show All Applications
|
|
|
Back to Top
