Volvo GLE - Steering Rack
Power - Cam Gear Brand Vehicles originally equipped with ZF brand power steering racks will also require #271387 rack mounting kit and #948645 lock nut if a "NEW" TRW rack is being installed. Mounting kit and lock nut are not required when installing a Maval reman. power steering rack. You can determine what type of Rack & Pinion was originaly installed on the car by locating a service plate found on the Trunk frame or Door pillar. It will list many different components, with one being the "Steering Gear". On this plate, to the right of the words steering gear you will see a number - 2/3/4/5. The numbers 2, 4, or 5 designates a Cam Gear rack was used, number 3 designates a ZF rack was used.. Remanufactured
|
Volvo GLE - Steering Rack Boot
w/ Power Steering - ZF brand rack - Boot kit You can determine what type of Rack & Pinion was originaly installed on the car by locating a service plate found on the Trunk frame or Door pillar. It will list many different components, with one being the "Steering Gear". On this plate, to the right of the words steering gear you will see a number - 2/3/4/5. The numbers 2, 4, or 5 designates a Cam Gear rack was used, number 3 designates a ZF rack was used..
|
Volvo GLE - Steering Rack Lock Nut
Exhaust Manifold to Cylinder Head. To Convert from ZF to CAM Gear Brand Power Steering Rack For use to convert ZF rack to Cam Gear brand replacement (2 required). Not required on '79 and later 240/260 models when Maval brand reman. rack is used..
|
Volvo GLE - Steering Rack Mount Kit
To Convert from ZF to CAM Gear Brand Power Steering Rack For use when replacing ZF racks with Cam Gear brand. Not required on '79 and later 240/260 models when Maval brand reman. rack is used. Kit should be used for both the ZF and Cam gear brands. For use when replacing ZF racks with Cam Gear brand. Not required on '79 and later 240/260 models when Maval brand reman. rack is used. Kit should be used for both the ZF and Cam gear brands..
|
Volvo GLE - Left Steering Rack Boot
w/ Power Steering - CAM Gear Rack - Boot kit (racks marked 1272460,1273236,1329998) You can determine what type of Rack & Pinion was originaly installed on the car by locating a service plate found on the Trunk frame or Door pillar. It will list many different components, with one being the "Steering Gear". On this plate, to the right of the words steering gear you will see a number - 2/3/4/5. The numbers 2, 4, or 5 designates a Cam Gear rack was used, number 3 designates a ZF rack was used.. Left Only
- Brand: Scan-Tech
- Location: Left
|
Back to Top
