Volvo 745 - Steering Rack
w/ Tie Rods. Remanufactured
|
Volvo 745 - Steering Rack
"POWER RACK AND PINION -- Original Equipment Replacement, Meets Or Exceeds OE Specs"
- 1985 - 4Cyl 2.3L GLE
- 1985 - 6Cyl 2.4L GLE
|
Volvo 745 - Left Steering Rack Boot Kit
CAM Gear Brand Rack - Wagon You can determine what type of Rack & Pinion was originaly installed on the car by locating a service plate found on the Trunk frame or Door pillar. It will list many different components, with one being the "Steering Gear". On this plate, to the right of the words steering gear you will see a number - 2/3/4/5. The numbers 2, 4, or 5 designates a Cam Gear rack was used, number 3 designates a ZF rack was used. CAM Gear Rack - Wagon You can determine what type of Rack & Pinion was originaly installed on the car by locating a service plate found on the Trunk frame or Door pillar. It will list many different components, with one being the "Steering Gear". On this plate, to the right of the words steering gear you will see a number - 2/3/4/5. The numbers 2, 4, or 5 designates a Cam Gear rack was used, number 3 designates a ZF rack was used..
- Brand: Scan-Tech
- Location: Left
|
Volvo 745 - Left Steering Rack Boot
CAM Gear Rack - Wagon You can determine what type of Rack & Pinion was originaly installed on the car by locating a service plate found on the Trunk frame or Door pillar. It will list many different components, with one being the "Steering Gear". On this plate, to the right of the words steering gear you will see a number - 2/3/4/5. The numbers 2, 4, or 5 designates a Cam Gear rack was used, number 3 designates a ZF rack was used..
- Brand: Scan-Tech
- Location: Left
|
Volvo 745 - Steering Rack Boot Kit
ZF Gear Brand Rack - You can determine what type of Rack & Pinion was originaly installed on the car by locating a service plate found on the Trunk frame or Door pillar. It will list many different components, with one being the "Steering Gear". On this plate, to the right of the words steering gear you will see a number - 2/3/4/5. The numbers 2, 4, or 5 designates a Cam Gear rack was used, number 3 designates a ZF rack was used..
|
Back to Top
