Jeep Sound Deadner

Featured Models

Home > Shop By Department > Sound Deadner > Jeep Sound Deadner

There are a lot of negative things that Jeep owners would normally accept as something in exchange for the off-road capability of their vehicles. Ride discomforts caused by the vehicle's suspension and the off-road track on where it runs, for example, are given negative characteristics that Jeep owners are willing to take. As much as possible, though, you wouldn't want other things to add more to this discomfort. Road noise, engine noise, exhaust noise, wind noise and all other sorts of noise that penetrates through the sheet metal body panels of your Jeep are unwelcome discomforts that you would really want to avoid. So how can you get away from these added discomforts? Use Jeep sound deadeners!

Sound deadeners, or sound deadening materials, refer to any vehicle accessory used to suppress or block the sound that penetrates into the vehicle's interior. Since noise would pierce easily through any of the vehicle's sheet metal body panel parts, many people would cover almost all of these parts with deadeners, from the floor pan, to the roof, to the side panels, inside the doors, in the firewall and even behind the rear seats. There are even sound deadeners that can be used on the underside of the hood or in a vehicle's trunk.

There are three basic types of sound deadening materials that may be used in vehicles and each differs in the way they muffle external noise. The first type is the sound damper. Sound dampers reduce the noise by adding load to the panels, thus reducing the vibration of loose panels. By far, this type of sound deadening material is the most commonly used in vehicles today.

Another type of sound deadening material used in vehicles is the sound absorbers. These materials are generally thicker than sound dampers and muffles noise by absorbing airborne sound waves. Then, a third type of sound deadening material is the sound barriers. Just as its name implies, sound barriers form a barrier or wall that blocks airborne noise from passing through. Like sound absorbers, sound barriers are also often thick, usually made up of either an elastomer or lead septum attached to a foam layer.

As to what kind of sound deadener you must install on your Jeep to block off much of the noise coming from its engine, its exhaust, the road and the wind all depends on you. Sound barriers would generally block off more noise than the other two but they are also the most expensive and the thickest. Sound absorbers, on the other hand, are the most popular because they are the thinnest. But whatever type of Jeep sound deadener you prefer to install on your vehicle, you can be assured that we have them for you here at Parts Train.