 Featured Products |
Chevrolet Truck - Rocker Panel
"ROCKER PANEL, PASSENGER SIDE -- A High Quality, Direct Fit OE Replacement For Rocker Panel"
- 1947,1948,1949,1950,1951,1952,1953 - 6Cyl 3.5L Base
- 1952,1953,1954,1955 - 6Cyl 3.9L Base
- 1954,1955 - 6Cyl 4.3L Base
- 1955 - 8Cyl 4.3L Base
|
Chevrolet Truck - Rocker Panel
"ROCKER PANEL, DRIVER SIDE -- A High Quality, Direct Fit OE Replacement For Rocker Panel"
- 1947,1948,1949,1950,1951,1952,1953 - 6Cyl 3.5L Base
- 1952,1953,1954,1955 - 6Cyl 3.9L Base
- 1954,1955 - 6Cyl 4.3L Base
- 1955 - 8Cyl 4.3L Base
|
Chevrolet Townsman - Rocker Arm
"COMP CAMS PRO MAGNUM ROLLER ROCKER ARM, 1 PIECE -- 0.4375 Stud, Ratio 1.7, Built Entirely From 8650 Chromemoly For Unsurpassed Strength And Fully Rebuildable, A Unique Design Enables To Use A Larger Trunion With More Needle Bearings, Added Strength And Reduced Mass In Low Stress Areas For More Rpm And Valve Train Stability, Includes An Integral Pushrod Seat That Ensures Accuracy And Saves Weight, Provides Plenty Of Clearance For Most High Performance Valve Springs, Ideally Suited For Serious Street, Bracket Racing, Super Classes, And Circle Track Racing, With ManufacturerÂ’s Limited Warranty"
- 1970 - 8Cyl 7.4L "Gas, Carb, 454, 4BBL" Base
- 1972 - 8Cyl 6.6L "Gas, CARB, 402, 4BBL, Vin "S" Base
- 1972 - 8Cyl 7.4L "Gas, CARB, 454, 4BBL, Vin "V" Base
|
Chevrolet Townsman - Rocker Arm
"COMP CAMS MAGNUM ROLLER ROCKER ARMS, SET OF 16 -- 0.375 Stud, Shaft Ratio 1.72, Made From 8620 Chromemoly Steel That Is Stronger Than Die-Cast Aluminum Or Stamped Steel Rockers And Will Not Flex For Its Rigid Design, Offers 15-30 Horsepower Gains Over Stock Rocker Arms, Provides Super Accurate Ratios Which Yield More Effective Valve Lift, Durable Roller Tip Design That Reduces Friction, For Use With Hydraulic Or Solid Cams Where Open Spring Pressure Does Not Exceed 350 Lbs, With Manufacturer's Limited Warranty"
- 1970 - 8Cyl 7.4L "Gas, Carb, 454, 4BBL" Base
- 1972 - 8Cyl 6.6L "Gas, CARB, 402, 4BBL, Vin "S" Base
- 1972 - 8Cyl 7.4L "Gas, CARB, 454, 4BBL, Vin "V" Base
|
Chevrolet Townsman - Rocker Arm
"COMP CAMS MAGNUM ROLLER ROCKER ARMS, SET OF 16 -- 0.375 Stud, Shaft Ratio 1.52, Made From 8620 Chromemoly Steel That Is Stronger Than Die-Cast Aluminum Or Stamped Steel Rockers And Will Not Flex For Its Rigid Design, Offers 15-30 Horsepower Gains Over Stock Rocker Arms, Provides Super Accurate Ratios Which Yield More Effective Valve Lift, Durable Roller Tip Design That Reduces Friction, For Use With Hydraulic Or Solid Cams Where Open Spring Pressure Does Not Exceed 350 Lbs, With Manufacturer's Limited Warranty"
- 1969 - 8Cyl 5.7L "Gas, Carb, 350, 4 BBL" Base
- 1970,1971 - 8Cyl 5.7L "Gas, Carb, 350, 2BBL" Base
- 1970,1971 - 8Cyl 6.6L "Gas, Carb, 400, 2BBL" Base
- 1972 - 8Cyl 5.7L "Gas, CARB, 350, 2BBL, Vin "H" Base
- 1972 - 8Cyl 6.6L "Gas, CARB, 400, 2BBL, Vin "R" Base
|
|
|
Back to Top
