 Featured Products |
Chevrolet Truck - Rocker Panel
"ROCKER PANEL, PASSENGER SIDE -- A High Quality, Direct Fit OE Replacement For Rocker Panel"
- 1947,1948,1949,1950,1951,1952,1953 - 6Cyl 3.5L Base
- 1952,1953,1954,1955 - 6Cyl 3.9L Base
- 1954,1955 - 6Cyl 4.3L Base
- 1955 - 8Cyl 4.3L Base
|
Chevrolet Truck - Rocker Panel
"ROCKER PANEL, DRIVER SIDE -- A High Quality, Direct Fit OE Replacement For Rocker Panel"
- 1947,1948,1949,1950,1951,1952,1953 - 6Cyl 3.5L Base
- 1952,1953,1954,1955 - 6Cyl 3.9L Base
- 1954,1955 - 6Cyl 4.3L Base
- 1955 - 8Cyl 4.3L Base
|
Chevrolet Kingswood - Rocker Arm
"COMP CAMS ALUMINUM ROLLER ROCKER ARMS, SET OF 8 -- 0.4375 Stud, Shaft Ratio 1.6, Made From High Quality Aluminum Alloy For Durability With A Tensile Strength Of 80,000 PSI, Features 350 lbs. Open Spring Pressure With High Valve Spring Loads, With Needle-Bearing Trunions To Withstand High Valve Spring Pressures, With Manufacturer's Limited Warranty"
- 1969 - 8Cyl 5.7L "Gas, CARB, 4BBL, 350" Base
- 1969 - 8Cyl 5.7L "Gas, CARB, 4BBL, 350" ESTATE
- 1970 - 8Cyl 5.7L "Gas, CARB, 2BBL, 350" ESTATE
- 1970,1971 - 8Cyl 5.7L "Gas, CARB, 2BBL, 350" Base
- 1970,1971 - 8Cyl 6.6L "Gas, Carb, 2BBL, 400" Base
- 1970,1971 - 8Cyl 6.6L "Gas, Carb, 2BBL, 400" ESTATE
- 1972 - 8Cyl 5.7L "Gas, CARB, 2BBL, 350, Vin H" Base
- 1972 - 8Cyl 5.7L "Gas, CARB, 2BBL, 350, Vin H" ESTATE
- 1972 - 8Cyl 6.6L "Gas, Carb, 2BBL, 400, VIN R" Base
- 1972 - 8Cyl 6.6L "Gas, Carb, 2BBL, 400, VIN R" ESTATE
- Show All Applications
|
Chevrolet Kingswood - Rocker Arm
"COMP CAMS MAGNUM ROLLER ROCKER ARMS, SET OF 16 -- 0.375 Stud, Shaft Ratio 1.72, Made From 8620 Chromemoly Steel That Is Stronger Than Die-Cast Aluminum Or Stamped Steel Rockers And Will Not Flex For Its Rigid Design, Offers 15-30 Horsepower Gains Over Stock Rocker Arms, Provides Super Accurate Ratios Which Yield More Effective Valve Lift, Durable Roller Tip Design That Reduces Friction, For Use With Hydraulic Or Solid Cams Where Open Spring Pressure Does Not Exceed 350 Lbs, With Manufacturer's Limited Warranty"
- 1970 - 8Cyl 7.4L "Gas, Carb, 454, 4BBL" Base
- 1971 - 8Cyl 6.6L "Gas, Carb, 402, 4BBL" Base
- 1971 - 8Cyl 6.6L "Gas, Carb, 402, 4BBL" ESTATE
- 1972 - 8Cyl 6.6L "Gas, CARB, 402, 4BBL, Vin "S" Base
- 1972 - 8Cyl 6.6L "Gas, CARB, 402, 4BBL, Vin "S" ESTATE
- 1972 - 8Cyl 7.4L "Gas, CARB, 454, 4BBL, Vin "V" Base
- 1972 - 8Cyl 7.4L "Gas, CARB, 454, 4BBL, Vin "V" ESTATE
- Show All Applications
|
Chevrolet Kingswood - Rocker Arm
"COMP CAMS MAGNUM ROLLER ROCKER ARM, 1 PIECE -- 0.375 Stud, Shaft Ratio 1.52, Made From 8620 Chromemoly Steel That Is Stronger Than Die-Cast Aluminum Or Stamped Steel Rockers And Will Not Flex For Its Rigid Design, Offers 15-30 Horsepower Gains Over Stock Rocker Arms, Provides Super Accurate Ratios Which Yield More Effective Valve Lift, Durable Roller Tip Design That Reduces Friction, For Use With Hydraulic Or Solid Cams Where Open Spring Pressure Does Not Exceed 350 Lbs, With Manufacturer's Limited Warranty"
- 1969 - 8Cyl 5.7L "Gas, Carb, 350, 4 BBL" Base
- 1969 - 8Cyl 5.7L "Gas, Carb, 350, 4 BBL" ESTATE
- 1970 - 8Cyl 5.7L "Gas, Carb, 350, 2BBL" ESTATE
- 1970,1971 - 8Cyl 5.7L "Gas, Carb, 350, 2BBL" Base
- 1970,1971 - 8Cyl 6.6L "Gas, Carb, 400, 2BBL" Base
- 1970,1971 - 8Cyl 6.6L "Gas, Carb, 400, 2BBL" ESTATE
- 1972 - 8Cyl 5.7L "Gas, CARB, 350, 2BBL, Vin "H" Base
- 1972 - 8Cyl 5.7L "Gas, CARB, 350, 2BBL, Vin "H" ESTATE
- 1972 - 8Cyl 6.6L "Gas, CARB, 400, 2BBL, Vin "R" Base
- 1972 - 8Cyl 6.6L "Gas, CARB, 400, 2BBL, Vin "R" ESTATE
- Show All Applications
|
|
|
Back to Top
