Engines have moving parts that need to be constantly lubricated when the engine is running. Without lubrication, these engine parts will overheat and may breakdown. Oil circulates the engine block to lubricate the engine parts and to take away some of the heat produced by the engine. The oil also takes away any dirt or residues that may be formed inside the engine block. Hence, the oil accumulates dirt in the process. If the oil accumulates too much dirt, it would be less effective in lubricating the engine. Oil filters like the Ford oil filter prevent the accumulation of dirt in the oil. Consequently, the oil has longer lifespan. There is no need to frequently change oil. However, this is not always been the case.

Early modes of automobiles did not have oil filter. Hence, the oil must be changed every 500 miles of driving. Most car owners then typically forgot to change oil. Consequently, their automobiles were prone to breakdowns. The earliest type of oil filter installed was also less effective because not all oil was routed to the filter. Some of the oil was routed to the crankshaft and transmission line of the vehicle. The oil still accumulated dirt in the long run. Frequent change in oil was expensive and inconvenient. Fortunately, the oil filter is now a standard component of modern automobiles. It is now more efficient in screening out dirt than the early types of oil filter.

Although the modern oil filter has not changed much, it is now more effective because of the re-routing of the oil circuit and the addition of pressure valves. The oil filter is comprised of a layered and folded paper filter enclosed inside a porous canister. The porous canister is protected by a metal or plastic housing shaped like a can. There are two hoses connected to the oil filter. One hose is the inlet hose while the other hose is the outlet hose. Oil is pumped by an oil pump. This oil pump is a simple centrifugal pump that sucks oil by creating partial vacuum. Oil is channeled from the oil reservoir to the oil filter. Before oil flows to the engine block, impurities are removed first by the oil filter.

As the oil circulates the engine block, it takes away any residues left by combustion. The residues are channeled back to the oil reservoir. Dirt accumulation takes time. Hence, the oil in the reservoir can be reused several times without the need for oil change. The oil filter is one of the most important components that maintain engine efficiency. If it is time to replace the oil filter of your vehicle, you can rely on Parts Train to provide you with the best aftermarket replacement.
.