Triumph Muffler |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Home >
Shop By Department >
Muffler >
Triumph Muffler |
|
Triumph Muffler |
Owning an automobile does not just mean possessing a valuable ride; this is coupled with a responsibility. This responsibility is not only for the Triumph model that you have, but for your safety, those of others in the traffic, and for the community as well. Triumph automakers understand this. That is why you are equipped with all that you need in achieving best performance that equals look and safety features. One of these is the Triumph muffler that sticks under the main frame of your high end Triumph vehicle.
Your Triumph model can be traced back to its origins in 1885 from the founders Siegfried Bettman and Moritz Schulte. These two put up Bettman & Co, selling bicycles in the premises of London and then machines later on, which eventually ended up to automobiles. This paved the way to Triumph Motor Company in 1930. After the World War II, the company passed succession of owners from the Standard Motor Company to the Leyland Motors Limited. Today, the BMW owns the Triumph brand and together, they make higher end models.
Triumph models have always pride themselves with the unique features that they have. The main engine system, for example, attains its peak performance with the technology-based subsystems that support it. One of its main helper is the exhaust system that takes care of the exhausts produced. This system regulates the emission as well as the sound that it creates. The main component of the exhaust system that controls the exhaust note is the Triumph muffler.
Inside the Triumph muffler is a set of tubes. These tubes interfere each other to cancel out the sound made by the pressure waves when the exhaust intake valves open up to receive the exhausts from the engine after the fourth stroke, the exhaust stroke. The muffler consists of an outlet, a resonator chamber, perforations, and an inlet. A hole connects the entireness of this device.
Like any other performance part of your Triumph, the Triumph muffler also wears out in time. This is caused by the harmful elements and chemicals that usually pass through the component in the form of the exhaust. Because of this, you have to observe maintenance. However, when irregularities start to creep into your muffler, it is time that you get it replaced with the aftermarket replacement available at Parts Train. Here, all your auto needs are given answers with as simple as a visit to our site, regardless of the vehicle make and model that you might have. For more information and details, check us out now.
|
|
 Featured Products |
Triumph TR6 - Muffler
"ANSA SPORT HIGH PERFORMANCE REAR MUFFLER, DIRECT FIT -- 16 Lbs, Made From 16 Gauge Heavy Duty Aluminized Steel, With Stainless Dual Angle Cut 60mm Tips, Features A Free-Flow Design That Increases Engine Performance By Decreasing Backpressure While Giving A Powerful Sound, Designed To Deliver The Perfect Balance Between Performance And Aesthetics, Easy Installation"
- 1972,1973,1974 - 6Cyl 2.5L "Gas, CARB" Base
- 1975,1976 - 6Cyl 2.5L "Gas, CARB, CF" Base
|
Triumph TR6 - Muffler
"ANSA SPORT HIGH PERFORMANCE REAR MUFFLER, DIRECT FIT -- 16 Lbs, Made From 16 Gauge Heavy Duty Aluminized Steel, With Stainless Dual Angle Cut 60mm Tips, Features A Free-Flow Design That Increases Engine Performance By Decreasing Backpressure While Giving A Powerful Sound, Designed To Deliver The Perfect Balance Between Performance And Aesthetics, Easy Installation"
- 1972,1973,1974 - 6Cyl 2.5L "Gas, CARB" Base
- 1975,1976 - 6Cyl 2.5L "Gas, CARB, CF" Base
|
Triumph TR6 - Muffler
"ANSA SPORT HIGH PERFORMANCE REAR MUFFLER, DIRECT FIT -- 16 Lbs, Made From 16 Gauge Heavy Duty Aluminized Steel, With Stainless Dual Angle Cut 60mm Tips, Features A Free-Flow Design That Increases Engine Performance By Decreasing Backpressure While Giving A Powerful Sound, Designed To Deliver The Perfect Balance Between Performance And Aesthetics, Easy Installation"
- 1972,1973,1974 - 6Cyl 2.5L "Gas, CARB" Base
- 1975,1976 - 6Cyl 2.5L "Gas, CARB, CF" Base
|
Triumph TR6 - Muffler
"ANSA SPORT HIGH PERFORMANCE REAR MUFFLER, DIRECT FIT -- 16 Lbs, Made From 16 Gauge Heavy Duty Aluminized Steel, With Stainless Dual Angle Cut 60mm Tips, Features A Free-Flow Design That Increases Engine Performance By Decreasing Backpressure While Giving A Powerful Sound, Designed To Deliver The Perfect Balance Between Performance And Aesthetics, Easy Installation"
- 1972,1973,1974 - 6Cyl 2.5L "Gas, CARB" Base
- 1975,1976 - 6Cyl 2.5L "Gas, CARB, CF" Base
|
Triumph TR7 - Muffler
"MBRP UNIVERSAL MUFFLER, ALUMINIZED -- 5" Inlet/Outlet, 24" Body, 31" Overall"
- 1975,1976,1977,1978,1979,1980,1981 - 4Cyl 2.0L Base
|
|
|
|
|
|
|
|
|
Back to Top
