A leaking intake manifold gasket is a common auto problem. For the past decades, auto manufacturers have made big strides on anti-leak designs for their manifolds. However, manifold malfunctions persist. Selected makes are even associated with the problem. Most recently, a group of disgruntled General Motors and Ford owners complained about the faulty manifold gaskets in their vehicles. It resulted in a class action law suit against the popular car manufacturers. Still, filing a law suit is not the best way to approach the problem. Through simple maintenance and routine replacement, your manifold gasket will go a long way in terms of service and performance.
The gasket is a support unit of your intake manifold, a very important component of the engine. The intake guides the air-fuel mixture to different engine cylinders, where it's ignited to produce energy. The manifold also helps cool the engine. Inside it, there are several chambers that route anti-freeze throughout the engine, preventing overheats. Since the intake manifold carries fuel and anti-freeze, it needs to be complemented by high-quality intake manifold gaskets to prevent fluid leaks. After prolonged use and constant exposure to engine heat, the gaskets will give in to wear and tear. When this happens, they have to be replaced as soon as possible.
In selecting a replacement car intake manifold gasket, you have to consider four things: material, fitment, part service, and price. The component is commonly molded from top-grade rubber, which offers unparalleled resistance to heat and warping. Purchase a direct-fit replacement to save-up on time and effort. Units that are specifically made for your make and model will eliminate the need to make modifications for installation. This'll make it an easy do-it-yourself project. Also, you should get your replacement from a trusted aftermarket manufacturer, like Replacement, Felpro, and Auto Trust. Established brands usually offer post-sale guarantees and warranties to ensure customer satisfaction. Lastly, you need to consider the price. You can get a top-quality unit for around $15 to $80.
Installing an intake manifold gasket is quite easy. All you need is a replacement component, a screwdriver, a system tester, a scraper, a socket and ratchet set, and a bottle of coolant. First, disconnect the negative cable battery and remove the distributor from the manifold. Disconnect the hoses that are on the front of the intake using your screwdriver. After that, you can remove the manifold's retaining bolts and lift the unit off the engine. Locate the gaskets and replace them with your replacements. Before installing them, coat their sides with sealers to ensure optimum performance. Tighten the retaining bolts of the gaskets and reassemble the unit, the hoses, and the distributor. It's that simple!
Should you need a direct-fit intake manifold gasket, you can count on Parts Train to provide you a high-quality unit at an affordable price. With over two decades of experience, Parts Train is one of the most trusted DIY resources in the World Wide Web.