 Featured Products |
Plymouth Duster - Intake Manifold
"Performer RPM 340/360, Intake Manifold, Designed For Great Top End Power With Good Throttle Response, High Rise, Dual Plane, Non-EGR, 1500-6500rpm, Cast Finish, Not For Sale Or Use On Emissions Equipped Vehicles, Recommend FelPro Gasket PN[1213] For Manifold Gasket"
- 1970,1971,1972,1973 - 8Cyl 5.6L 340, Gas, 4 Barrel, VIN "H" 340
- 1970,1971,1972,1973,1974,1975 - 8Cyl 5.2L "Gas, 2 Barrel, VIN G" Base
- 1974,1975 - 8Cyl 5.9L "Gas, 4 Barrel, VIN L" 360
- 1975 - 8Cyl 5.2L "Gas, 2 Barrel, VIN G" Custom
- 1976 - 8Cyl 5.2L "Gas, 2 Barrel, VIN G" Sport
- 1976 - 8Cyl 5.9L "Gas, 4 Barrel, VIN L" Sport
- Show All Applications
|
Plymouth Duster - Intake Manifold
"RPM Air Gap 340/360, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, Accepts Early-Style Waterneck Only, With Nitrous Bosses, Cast Finish, Not Legal For Sale Or Use On Pollution Controlled Motor Vehicles, Recommend FelPro Gasket PN[1213] for Manifold Gasket"
- 1970,1971,1972,1973 - 8Cyl 5.6L "Gas, 4 Barrel, VIN H" 340
- 1970,1971,1972,1973,1974,1975 - 8Cyl 5.2L "Gas, 2 Barrel, VIN G" Base
- 1974,1975 - 8Cyl 5.9L "Gas, 4 Barrel, VIN L" 360
- 1975 - 8Cyl 5.2L "Gas, 2 Barrel, VIN G" Custom
- 1976 - 8Cyl 5.2L "Gas, 2 Barrel, VIN G" Sport
- 1976 - 8Cyl 5.9L "Gas, 4 Barrel, VIN L" Sport
- Show All Applications
|
Plymouth Duster - Action Plus Series Intake Manifold - Satin
"WEIAND ACTION PLUS SERIES INTAKE MANIFOLD, SATIN FINISH -- Front/Rear Height 4.88/5.94, Port Size 1.96 x 1", Power Band Idle-6000 RPM, Single 4 Barrel Manifold That Features Spread Bore And Square Bore Carburetor Mounting Flange, 180 Degree High-Rise Dual-Plane Manifold, Designed As A Stock Replacement Manifold With Improved Power And Torque Characteristics, Effective RPM Range Idle-5500, Carburetor Mounting Pads Available, Non-EGR Provision"
- Brand: Weiand
- Finish: Satin
- Series: Action Plus Series
- 1970,1971,1972,1973 - 8Cyl 5.6L "Gas, Carb, 4BBL, 340, VIN "H", FTC" 340
- 1970,1971,1972,1973,1974,1975 - 8Cyl 5.2L "Gas, Carb, 2BBL, 318, VIN "G", FTC" Base
- 1974,1975 - 8Cyl 5.9L "Gas, Carb, 4BBL, 360, VIN "L", FTC" 360
- 1975 - 8Cyl 5.2L "Gas, Carb, 2BBL, 318, VIN "G", FTC" Custom
- 1976 - 8Cyl 5.2L "Gas, Carb, 2BBL, 318, VIN "G", FTC" Sport
- 1976 - 8Cyl 5.9L "Gas, Carb, 4BBL, 360, VIN "L", FTC" Sport
- Show All Applications
|
Plymouth Duster - Intake Manifold - Satin
"WEIAND STEALTH SERIES INTAKE MANIFOLD, SATIN FINISH -- Single 4 Barrel Manifold, Non-EGR, Power Band To 6800 RPM, Combines The Low-End Throttle Response Of A 180 Degree Design With The Top-End Power Of A Single Plane Manifold"
- Brand: Weiand
- Finish: Satin
- 1970,1971,1972,1973 - 8Cyl 5.6L "Gas, Carb, 4BBL, 340, VIN "H", FTC" 340
- 1970,1971,1972,1973,1974,1975 - 8Cyl 5.2L "Gas, Carb, 2BBL, 318, VIN "G", FTC" Base
- 1974,1975 - 8Cyl 5.9L "Gas, Carb, 4BBL, 360, VIN "L", FTC" 360
- 1975 - 8Cyl 5.2L "Gas, Carb, 2BBL, 318, VIN "G", FTC" Custom
- 1976 - 8Cyl 5.2L "Gas, Carb, 2BBL, 318, VIN "G", FTC" Sport
- 1976 - 8Cyl 5.9L "Gas, Carb, 4BBL, 360, VIN "L", FTC" Sport
- Show All Applications
|
Plymouth Duster - Intake Manifold Bolt Set - Aluminum Steel
"MR GASKET INTAKE MANIFOLD BOLT KIT, ZINC PLATED -- 3/8"-16 X 1" Socket Head, Made From Grade 5 Steel For Strength And Durability, Zinc Plated To Resist Corrosion And Provides A Clean Professional Appearance, Comes With Flat Washers That Provide Uniform Clamp Load And Prevent Galling On Aluminum Intake Manifolds, With Mr. Gasket's Limited Warranty"
- Brand: Mr Gasket
- Material: Aluminum Steel
- 1970,1971,1972,1973 - 8Cyl 5.6L 340 340
- 1970,1971,1972,1973,1974,1975 - 8Cyl 5.2L 318 Base
- 1974,1975 - 8Cyl 5.9L 360 360
- 1975 - 8Cyl 5.2L 318 Custom
- 1976 - 8Cyl 5.2L 318 Sport
- 1976 - 8Cyl 5.9L 360 Sport
- Show All Applications
|
|
|
Back to Top
