Jeep Intake Manifold

Featured Models

Home > Shop By Department > Intake Manifold > Jeep Intake Manifold

The engine of your Jeep is responsible for the production of the air and fuel mixture vitally needed by the auto parts making up the car. The mixture passes through a series of ports and chambers before going into the designated systems. The engine itself is made up of components for easier circulation of the fuel and air mixture. The auto part responsible for the management of the fuel and air is the Jeep intake manifold system. It serves as the bridge that connects the other components of the engine to the intake ports for easier passage of the needed mixture. Several designs and types are available which include cross ram, tunnel ram, open plenum, divided single plane, single plane with partial divider plate and isolated runner.

The intake manifold is mounted on top of the exhaust header although it may vary depending on the car type. It can be extra hot as the engine performs its expected tasks which include the combustion of fuel and air mixture. The component however can be protected from extreme heat using the intake manifold heat shield commonly mounted on the underside area of the manifold to obstruct the heat radiated from the header. Heat shields equipped with Thermotec barrier made from aluminum can offer greater protection against radiant heat especially the areas made up of plastic components or covered with paint. Aluminum heat shields are made from woven silica polished with durable aluminum touch for much better protection. Some products come with specially made adhesive for easier installation process.

Choosing the right type of intake manifold for your car can readily improve its over all performance in particular if it is matched with the power boosting capacity of the car. Intake manifolds must be made up of ports big enough for the mixture to pass through together with smooth lines for much efficient intake, Modifying the manifold is a great way to enhance its over all performance as well as of the car in general. You can do it on your own or much better, seek help from an expert auto mechanic.

Out in the market are intake manifold replacements if you want to have a renewed auto performance in all types of roads and driving conditions. You can find it in your nearest local store or much better, in the internet. Web based stores are now ready to offer their services and products anytime you want or anywhere you may be. Placement of orders can be done simply by filling up the online forms or calling the telephone lines tied up with the store.

Featured Products Intake Manifold EDELBROCK PERFORMER AMC INTAKE MANIFOLD, CAST FINISH -- 4.2 in. Height A, 5.5 in. Height B, 1.03 in. X 2.07 in. Port Exit, Idle-5500 RPM, Non-EGR, Dual-Plane Design With Runner Tuning, Designed To Increase Your Vehicles Horsepower And Torque Over A Wide RPM Range, Street Legal Part For 360-401 V8s With OEM Carb, With 2 Center Bolt Holes Offset, Use Intake Gasket Fel-Pro #MS96011, Bracket #8034 Required For 1979 And Later Models, With Edelbrock's 90-Day Warranty Brand: Edelbrock Type: Direct OE Replacement Price: $275.13 Intake Manifold Performer AMC, Intake Manifold, Increased Horsepower And Torque That You Can Use Daily, EGR, Idle-5500 RPM, Will Not Accept Motorcraft Spread-Bore Carbs, Cast Finish, Not For Sale Or Use On Emissions Equipped Vehicles, Recommend FelPro Gasket Part # MS960 Brand: Edelbrock Type: Direct OE Replacement Price: $351.72 Intake Manifold RPM Air Gap AMC, Intake Manifold, Makes Power In The 1500 To 6500 RPM Range, Provides Cooler Denser, Air Charge For More Power, Non-EGR, AMC 304-401 cid, For Square-Bore Carbs, Cast Finish, Not Legal For Sale Or Use On Pollution Controlled Motor Vehicles, Recommend FelPro Gasket PN[MS96011] for Manifold Gasket Brand: Edelbrock Type: Direct OE Replacement Price: $351.55 Intake Manifold OMIX INTAKE MANIFOLD -- A High Quality, Direct Fit, OEM Replacement Intake Manifold, With Manufacturer's Limited Warranty Brand: Omix Type: Direct OE Replacement Price: $147.89 Intake Manifold Gasket FELPRO INTAKE MANIFOLD GASKET SET -- Designed To Be High Quality Direct Fit Replacements For Stock Intake Manifold Gaskets Brand: Felpro Type: Direct OE Replacement Price: $13.92