Car Headlight Assembly

Nighttime driving sometimes takes a lot of skill. That's because you can only see as far as your car's headlight assembly lets you. The only difference between experienced drivers and newbies is that long-time drivers know how to judge the distance and speed of an oncoming vehicle just by the little light available on the road. However, one fact remains true for nighttime drivers whether they're seasoned or not: they all greatly depend on the headlights.

Having fully functional headlights is one of the pre-requisites of safe driving. These lights let you see the road even in low-visibility situations. A car headlight assembly produces high and low beams. When switched to high beam, the headlights provide brighter, long-distance illumination. This headlight setting is used in dark streets and low-visibility conditions such as when there's fog or heavy rain. The high beam, however, should be used carefully as it might glare drivers of oncoming vehicles. The low beam, on the other hand, allows the headlights to focus their illumination on the road closer to the front of the vehicle. It is recommended for use on two-way streets with considerable traffic.

But aside from the careful use of these beam settings, it's important that headlight assemblies are properly aimed. Otherwise, you could end up giving oncoming drivers a dangerous dose of glare even if your beams are set on low. Glare can temporarily blind drivers, increasing the risk of accidents. To aim the headlights, park your car facing and close to a wall. Then, mark your car's horizontal centerline with masking tape. Back the car up to 25 feet away and align the headlights so that their high beam centers are on or just below the tape. This method will ensure that your headlights are turned up just right they won't blind oncoming drivers.

There's absolutely no excuse for driving at night without functional headlights. A stock headlight assembly is usually built to last a vehicle's lifetime. But, of course, headlights can still get on the blink (no pun intended). It could be due to burnt headlight bulbs, blown fuse, and loose or shorted wires. To fix these, you simply have to replace the affected components. Now, if aside from those, you also got cloudy headlight lenses, corroded reflectors and housing, and other headlight assembly-related problems to worry about, then you probably have to consider getting a new headlamp assembly right away.

Parts Train has one of the best headlight assembly selections online. Sourced from the most trusted manufacturers, our headlight assemblies are guaranteed to pass industry standards and state regulations. You only need to take a look at our online catalog to know that you can get the headlamp assembly you need at the price that you want.
.