Suzuki Harmonic Balancer
Get the right Suzuki Harmonic Balancer from Partstrain! Select your vehicle to ensure that you will find the right parts with a perfect fit.
|
Harmonic balancers are magnificent devices which are very important to the efficient working condition of your Suzuki’s engine and its internal parts. The engine produces power in a systematic cyclic manner, involving a lot of internal parts in the process. Each of these internal parts has an important part in the engine’s efficient working condition. One of these is the crankshaft that usually suffers because of the vibration caused by the power transmitted to it by the cylinders. To answer that problem, the Suzuki harmonic balancer has been equipped in your high-end model.
The Suzuki harmonic balancer is the specific harmonic balancer that is needed by your particular vehicle make. This component is a vibration damper that is connected to the front of the crankshaft to handle the torsional vibration. This vibration occurs when the cylinders fire, the power transmitted to the front of the crankshaft causing it to move before the rear does and resulting to a twisting motion. When the power is removed from the front, it unwinds and snaps back in an opposite direction and creates a torsional vibration.
At some engine speeds, the torsional vibration is in synch with the power released by the engine to the crankshaft, which results to a phenomenon called ‘resonance’. Resonance causes severe stress to the structure of the crankshaft, which is usually beyond what it can stand. Crankshaft failure is the common result of this. When the crankshaft fails, the working condition in the engine is disturbed. Without the function of the crankshaft, the entire engine cycle cannot be done, resulting to the failure of the whole system.
To keep this from happening to your Suzuki vehicle, the Suzuki Motor Corporation engineers have equipped your auto with a Suzuki harmonic balancer that is attached to the front of your engine’s crankshaft. It is composed of two elements: the mass element and the energy-dissipating element. The mass element of this damper resists the acceleration of the vibration while the energy-dissipating element consists of a rubber, a clutch, and fluid, and absorbs vibrations, resulting to a calmer crankshaft operation.
As your Suzuki vehicle ages however, its high-end parts and accessories age with it. The Suzuki harmonic balancer is just one of these and may fail you after quite sometime. Not to worry because aftermarket replacements for these devices are an easy find at Parts Train. Here you can get the same or better quality with the replacement for your erring stock Suzuki harmonic balancer. We also offer auto parts and accessories for all makes and models of vehicles. Check us out now in our 24 hours online auto shop or you can even call us toll-free for questions and more information about the product that you need.
 Featured Products |
Harmonic Balancer Puller
OTC HARMONIC BALANCER PULLER KIT -- Includes 3-jaw puller, four lengths of forcing rods, forcing screw with a 3/8 in. square drive for ratchet use, and 3/4 in. hex for wrench or socket use; Designed for removing damper pulleys in tight engine compartments without removing the radiator; For use on GM 2000 Generation III 4.8L, 5.3L, 5.7L 6.0L, and 8.1L V8s, Cadillac 4.5, 4.6, and 4.9L V8s beginning in 1988, Chevrolet trucks 2003 to later 4.2L I6, 2004 to current 3.5L I5, and 2005 to current 2.8L I4, Chrysler engines from 1990 to later including 2.0L, 2.4L-4s, 2.5L, 2.7L, 3.3L, 3.5L, and 3.8L V6s, Ford 1995 to later V8 engines with 3 spoke pressed on damper, and Mitsubishi Eclipse 1995 to 1999 2.0L DOHC non-turbo.
|
Harmonic Balancer Installer Adapter
LISLE HARMONIC BALANCER INSTALLER ADAPTER -- M14 X 1.5; An adapter for harmonic balancer installer part number 52650.
|
Harmonic Balancer Installer Adapter
LISLE HARMONIC BALANCER INSTALLER ADAPTER -- 1/2 in. x 1.5; An adapter for harmonic balancer installer part number 52650.
|
Harmonic Balancer Puller
OTC CHRYSLER CRANKSHAFT DAMPER PULLER INSERT -- This tool is used to remove crankshaft damper whenever timing belt, water pump, head gasket, or front cover service is required; Paired with OTC part number 1026 3-jaw Grip-O-Matic puller, it can be used when servicing 2.4L 4-cyl. and 2.5L V6 engines used in 1995 and newer Cirrus, Stratus, and Breeze; Also services 2.0L 4-cyl. engines in 1995 and newer Neon.
|
Harmonic Balancer Installer Adapter
LISLE HARMONIC BALANCER INSTALLER ADAPTER -- 3/4 - 16; An adapter for harmonic balancer installer part number 52650.
|
|
|
