Lincoln Harmonic Balancer
Get the right Lincoln Harmonic Balancer from Partstrain! Select your vehicle to ensure that you will find the right parts with a perfect fit.
|
The engine is one of the significant components that have to be protected always. This is because the engine is primarily responsible in burning the fuel which allows the vehicle to run. If the engine is well-protected, its service life is definitely prolonged. To protect and extend the life span of an engine, there are some auto components produced to do the said task. One of them is the harmonic balancer which is also known as vibration damper. The said device is connected to the crankshaft whose purpose is to radically reduce the torsional vibration. If torsional vibration is successfully lessened, frequent wear on the main bearings and main journals are restricted and at the same time failure on the crankshaft is avoided. This results to longer engine life.
The harmonic balancer has three major components – the inner portion, the center part, and the balancer’s outer section. The one that is located on the crankshaft is the inner portion. The one that is accountable in dampening the crankshaft vibration is the center part. This center part consists of a rubber ring. Meanwhile the balancer’s outer section is primarily designed to control the timing mark and the pulley cuts for the belt. Every time the power from the cylinder strikes the crankshaft, the crankshaft’s front portion acquires the impact of the said energy. In this case, it attempts to twist the heavy part of the damper, but it ends up twisting the rubber or disc. Subsequently, the halfway twisted shaft slow down and snaps back in opposite direction
In case you experience too much torsional vibration while driving your Lincoln vehicle, equipping it with Lincoln harmonic balancer is necessary. This Lincoln harmonic balancer that’s set into the front of the crankshaft, reduces the said vibration. The two parts of Lincoln harmonic balancer is connected by rubber plugs, spring loaded friction or both. When the power generated from the cylinder reaches the front of the crankshaft, it tries to twist the heavy portion of the damper. However, the result is twisting of the rubber or discs which connects the two damper components. Since there’s a damper, the front portion of the crank is incapable of speeding up. Instead, the force is being used in twisting the rubber and accelerating the damper wheel. The result is a smooth and calm operation of the crankshaft.
Just like any another components installed in your vehicle, this Lincoln harmonic balancer also fails to function due to severe use. Another reason is the normal wear and tear of its parts especially the rubber ring. If this happens, a replacement part is highly needed. When looking for replacement Lincoln harmonic balancer, you don’t need to go far. You can conveniently purchase the said device through Parts Train. Parts Train offers top of the line Lincoln harmonic balancer along with other auto and truck parts and accessories.
 Featured Products |
Engine Harmonic Balancer
ENGINE HARMONIC BALANCER -- A high quality, direct fit OE replacement harmonic balancer; Covered by a 1-year unlimited mileage warranty.
|
Harmonic Balancer Bolt
MR GASKET HARMONIC BALANCER BOLT AND WASHER KIT, BLACK -- .625' -18 x 2', Made From Grade 8 Alloy Material, Heat-Treated For Superior Strength, Features High Hex Head Design To Prevent Socket Slippage While Rotating The Engine When Degreeing A Cam Or Adjusting Valves, Includes Extra Thick, Parallel Ground Washer For Accurate And Uniform Torque, With Manufacturer's Limited 90-Day Warranty
- Brand: Mr Gasket
- Color: Black
|
Engine Harmonic Balancer - Nodular Iron
DORMAN HARMONIC BALANCER -- Solid type, externally balanced; 6-1/2 in. diameter, 4-1/4 in. width, 19.5 lbs.; A high quality direct fit OE replacement harmonic balancer; Replaces OE part number D8TZ 6316-B; With Dorman's limited lifetime warranty.
- Brand: Dorman
- Material: Nodular Iron
|
Engine Harmonic Balancer
DORMAN HARMONIC BALANCER -- Solid/hollow back type, externally balanced; 6-1/2 in. diameter, 4-1/4 in. width, 11 lbs.; A high quality direct fit OE replacement harmonic balancer; Replaces OE part number D8TZ 6316-B; With Dorman's limited lifetime warranty.
|
Engine Harmonic Balancer
DORMAN HARMONIC BALANCER -- Solid type; 6-1/2 in. diameter, 3-1/2 in. width, 7.4 lbs.; A high quality direct fit OE replacement harmonic balancer; With Dorman's limited lifetime warranty.
|
|
|
