Isuzu Harmonic Balancer
Get the right Isuzu Harmonic Balancer from Partstrain! Select your vehicle to ensure that you will find the right parts with a perfect fit.
|
Poor engine performance is a big “No” to an Isuzu vehicle. Isuzu vehicles are well-engineered to perform beyond expectations and are destined to travel boundless distance with a minimal engine fatigue. Isuzu engineers make sure that their line of vehicles is equipped with engines that excellently perform to provide optimum driving performance guaranteed of maximum comfort in every ride. And to achieve maximum comfort means to dampen the inherent vibrations produced when the engine is operational. One of the breakthroughs in the automotive engineering that is integrated in the Isuzu’s engine system is the Isuzu harmonic balancer. The main function of this device is to lessen the engine vibrations.
The Isuzu harmonic balancer is basically designed to prolong the life of the engine by delaying the wearing on the main bearings and journals thus preventing crankshaft failure. A harmonic balancer which is also called crank pulley, damper, torsional damper, or vibration damper is connected to the front part of the crankshaft to limit the pressure that is being applied into it when the cylinder starts to function. The three main parts that comprise the Isuzu harmonic balancer are: a steel outer part which has grooves for the belt, a steel inner part which attaches to the crankshaft, and a rubber disk or spring loaded discs, or both which is located at the center part.
As the Isuzu engine becomes operational, the power from the cylinder is transmitted through the crankshaft. The front portion of the crankshaft gets the impact thus causing twisting motion. This motion consequently produces “torsional vibration” which is being dampened by the Isuzu harmonic balancer. With the usage of the Isuzu harmonic balancer, the twisting motion ends up with the rubber or discs of the harmonic balancer therefore limiting the speed of the crank resulting to a calm operation. When the Isuzu harmonic balancer fails, excessive engine vibration, failure in the alternator, wobble in the drive pulley are among the symptoms that will show up.
However, if the Isuzu harmonic balancer can protect the vehicle’s crankshaft, there seems to be no way for it to protect itself. Though, routine maintenance will help, sooner or later the harmonic balancer will fail. If this happen then a replacement has to be made immediately and the right place that will quickly and efficiently attend to your harmonic balancer needs is Parts Train. Parts Train is the most trusted online car parts dealer that provides premium quality harmonic balancers that fit to any brand and type of vehicles. With a few clicks on the mouse, your order is processed and in no time your brand new Isuzu harmonic balancer is right next at your doorsteps!
 Featured Products |
Engine Harmonic Balancer
DORMAN HARMONIC BALANCER -- Double serpentine belt type; 7.72 in. diameter, 4.75 in. width, 10.4 lbs.; With pulleys; A high quality direct fit OE replacement harmonic balancer; Replaces OE part number 12576652; With Dorman's limited lifetime warranty.
|
Engine Harmonic Balancer
DORMAN HARMONIC BALANCER -- Double serpentine belt/V-belt type; 5.18 in. diameter, 3.05 in. width, 8.19 lbs.; A high quality direct fit OE replacement harmonic balancer; Replaces OE part number 8970868260; With Dorman's limited lifetime warranty.
|
Engine Harmonic Balancer
PROFORM HARMONIC BALANCER INSTALLER/PULLER -- Includes 7/16-20, 5/8 in. x 18, 3/4 in. x 16 adapters and various removal hardware; A heavy duty professional tool for engine builders; Fully equipped with roller thrust bearings; Can be used as a universal puller and also for steering wheel and pulley installation and removal; Maximum recommended torque of 150 ft.-lbs.; With Proform's limited 30-day warranty.
|
Harmonic Balancer Installer Adapter
LISLE HARMONIC BALANCER INSTALLER ADAPTER -- 7/16-20; An adapter for harmonic balancer installer part number 52650.
|
Harmonic Balancer Installer Adapter
LISLE HARMONIC BALANCER INSTALLER ADAPTER -- 3/4 - 16; An adapter for harmonic balancer installer part number 52650.
|
|
|
