Ferrari Harmonic Balancer
Get the right Ferrari Harmonic Balancer from Partstrain! Select your vehicle to ensure that you will find the right parts with a perfect fit.
|
Modern vehicles are equipped with different upgraded parts and accessories to address the needs of the driving public and meet regulations, especially in professional racing. Most of these add to the performance of the vehicle or the engine, which is the main producer of power. However, in your Ferrari, there is one component whose main feature is to protect one of the main engine components to optimize engine performance. This accessory is called the Ferrari harmonic balancer.
A harmonic balancer is a kind of damper that is also called as a crank pulley damper or a vibration damper. This damper is a device used in the crankshaft to reduce torsional vibration. It has two main elements, the mass element and the energy dissipating element. The energy dissipating element consists of a rubber, a clutch, and fluid. The mass element resists the acceleration of the vibration while the energy dissipating element absorbs it.
The torsional vibration that the Ferrari harmonic balancer in your engine controls is created due to the power transmitted to the front part of the crankshaft. When the cylinder fires, the front portion of the crankshaft takes the impact of this power, making it move ahead of the rear. When the power is then removed, it unwinds, causing the torsional vibration, and snaps back in an opposite direction. In certain engine speeds, this impact of power and the torsional vibration are in synch and results to resonance. This, in turn, leads to crankshaft failure.
The harmonic balancer is designed to prevent crankshaft failure, which will ultimately result to greater danger in the engine. However, many performance enthusiasts believe that its installation just reduces the working capacity of the engine. This is because of its mass that adds to engine burden. Nevertheless, its absence will also imperil the literal life of the engine. Just remember that performance should always be safe, and so the harmonic balancer still gives a lot of benefits compared to what many think are its disadvantages.
If you care about the safety of your vehicle’s engine, get your Ferrari a damper that will protect it from extensive wearing. You need a Ferrari harmonic balancer which you can always find here at Parts Train. Here you are assured of the quality and durability of the auto parts and accessories that we offer. We have a wide selection of products for various auto makes and models. Check us out in our 24 hours online auto shop or call us toll-free for assistance and more information.
 Featured Products |
Harmonic Balancer Puller
OTC HARMONIC BALANCER PULLER KIT -- Includes 3-jaw puller, four lengths of forcing rods, forcing screw with a 3/8 in. square drive for ratchet use, and 3/4 in. hex for wrench or socket use; Designed for removing damper pulleys in tight engine compartments without removing the radiator; For use on GM 2000 Generation III 4.8L, 5.3L, 5.7L 6.0L, and 8.1L V8s, Cadillac 4.5, 4.6, and 4.9L V8s beginning in 1988, Chevrolet trucks 2003 to later 4.2L I6, 2004 to current 3.5L I5, and 2005 to current 2.8L I4, Chrysler engines from 1990 to later including 2.0L, 2.4L-4s, 2.5L, 2.7L, 3.3L, 3.5L, and 3.8L V6s, Ford 1995 to later V8 engines with 3 spoke pressed on damper, and Mitsubishi Eclipse 1995 to 1999 2.0L DOHC non-turbo.
|
Harmonic Balancer Installer Adapter
LISLE HARMONIC BALANCER INSTALLER ADAPTER -- M14 X 1.5; An adapter for harmonic balancer installer part number 52650.
|
Harmonic Balancer Installer Adapter
LISLE HARMONIC BALANCER INSTALLER ADAPTER -- 1/2 in. x 1.5; An adapter for harmonic balancer installer part number 52650.
|
Harmonic Balancer Puller
OTC CHRYSLER CRANKSHAFT DAMPER PULLER INSERT -- This tool is used to remove crankshaft damper whenever timing belt, water pump, head gasket, or front cover service is required; Paired with OTC part number 1026 3-jaw Grip-O-Matic puller, it can be used when servicing 2.4L 4-cyl. and 2.5L V6 engines used in 1995 and newer Cirrus, Stratus, and Breeze; Also services 2.0L 4-cyl. engines in 1995 and newer Neon.
|
Harmonic Balancer Installer Adapter
LISLE HARMONIC BALANCER INSTALLER ADAPTER -- 3/4 - 16; An adapter for harmonic balancer installer part number 52650.
|
|
|
