Alfa+Romeo BERLINA - Harmonic Balancer
PROFORM HARMONIC BALANCER INSTALLER/PULLER -- Includes 7/16-20, 5/8 in. x 18, 3/4 in. x 16 adapters and various removal hardware; A heavy duty professional tool for engine builders; Fully equipped with roller thrust bearings; Can be used as a universal puller and also for steering wheel and pulley installation and removal; Maximum recommended torque of 150 ft.-lbs.
- Brand: Proform
- Type: Universal Product
|
Alfa+Romeo BERLINA - Harmonic Balancer Puller
OTC HARMONIC BALANCER PULLER KIT -- Includes 3-jaw puller, four lengths of forcing rods, forcing screw with a 3/8 in. square drive for ratchet use, and 3/4 in. hex for wrench or socket use; Designed for removing damper pulleys in tight engine compartments without removing the radiator; Use on GM 2000 Generation III 4.8L, 5.3L, 5.7L 6.0L, and 8.1L V8s, Cadillac 4.5, 4.6, and 4.9L V8s beginning in 1988, Chevrolet trucks 2003 to later 4.2L I6, 2004 to current 3.5L I5 and 2005 to current 2.8L I4, Chrysler engines from 1990 to later including 2.0L, 2.4L to 4s, 2.5L, 2.7L, 3.3L, 3.5L, and 3.8L V6s, Ford 1995 to later V8 engines with 3 spoke pressed on damper, and Mitsubishi Eclipse 1995 to 1999 2.0L DOHC non-turbo.
|
Alfa+Romeo BERLINA - Harmonic Balancer Puller
OTC GM AND CHRYSLER HARMONIC BALANCER PULLER KIT -- Includes 3-jaw puller, three lengths of forcing rods, and forcing screw with a 3/8 in. square drive for ratchet use; Allows the removal of Chrysler and GM damper pulleys in tight engine compartments without removing the radiator; For use on GM, 2000 Generation III 4.8L, 5.3L, 5.7L, 6.0L, and 8.1L V-8s, Cadillac 4.5, 4.6, and 4.9L V-8s beginning in 1988, and Chrysler engines beginning in 1990 thru 2002 including 2.0, 2.4 L-4s, 2.5L, 2.7L, 3.3L, 3.5L, and 3.8L V-6s.
|
Alfa+Romeo BERLINA - Harmonic Balancer Puller
OTC GM CRANKSHAFT BALANCER PULLER KIT AND ADAPTER SET -- Includes part number 518 flange-type puller and part number 7911 adapter set which consists of the spacer adapter and shoulder bolts only; This set has everything you need to pull harmonic balancers having three tapped holes; Shoulder bolts are designed to prevent harmonic balancers from being installed too deeply, protecting the crank sensor and interrupter rings from damage; Spacer adapter gives the puller's forcing screw something to push against; Works on 1990 to 2002 3300 and 3800 V6 engines.
|
