Toyota Radiator Fan Clutch

Get the right Toyota Radiator Fan Clutch from Partstrain! Select your vehicle to ensure that you will find the right parts with a perfect fit.


Home > Shop By Department > Fan Clutch > Toyota Radiator Fan Clutch
Browse our Wide Selection of Toyota Parts

  Toyota Condensers
  Toyota AC Compressor
  Toyota Alternator
  Toyota Bumpers
  Toyota Carpet
  Toyota Catalytic Converter
  Toyota Coolant Tank
  Toyota Door
  Toyota Door Handle
  Toyota Electrical Part
  Toyota Engine Part
  Toyota Exhaust
  Toyota Exhaust Manifold
  Toyota Fender
  Toyota Fender Flares
  Toyota Fender Trim
  Toyota Floor Mat
  Toyota Fuel Tank
  Toyota Grille
  Toyota Header Panels
  Toyota Hood
  Toyota Hubcaps
  Toyota Mirror
  Toyota Oxygen Sensor
  Toyota Radiator
  Toyota Radiator Supports
  Toyota Shock Absorber
  Toyota Spoilers
  Toyota Starter
  Toyota Struts
  Toyota Suspension
  Toyota Tailgate
  Toyota Towing Mirror
  Toyota Weatherstrip
  Toyota Wheel Covers
  Toyota Wheel
  Toyota Window Regulators
  Toyota Windshield
  Toyota Wiper Arm
 Lights
-- Toyota Altezza Lights
-- Toyota Backup Light
-- Toyota Clear Corner
-- Toyota Corner Light
-- Toyota Fog Light
-- Toyota Headlight
-- Toyota Parking Light
-- Toyota Projector Headlight
-- Toyota Sealed Beam
-- Toyota Side Marker Light
-- Toyota Tail Light
-- Toyota Turn Signal Light
 



Cooling fans play a very important part in every vehicle. Some vehicles have two smaller fans or one larger fan. The twin electric fan set up will employ one fan for cooling the vehicle’s engine while the other will be used for cooling the air conditioning and the radiator, but works only when the AC is on.

Knowing their purpose, why is it that most car owners ignore them? Did they know that the impressive performance of the car would often depend on those not-so-impressive parts like the cooling fans? Without this particular auto contraption and its components, your car engine would not be able to perform at its best. So every time you do your routine car checkup, make sure that your cooling fans, especially your cooling fan components are checked.

The parts that comprise your Toyota cooling fan are the fan shroud, fan motor, fan clutch and the fan blades of course. Each of these cooling fan components is tasked to serve different functions. A viscous or fluid coupling device connected to the center of your Toyota’s fan, the Toyota fan clutch regulates the speed of the fan relative to the engine’s speed and temperature.

Technically speaking, your Toyota fan clutch makes sure that the fan will run or spin at the apt speed to thwart the engine from overheating and to decrease drive to the fan when it is no longer needed. As the temperature in the engine area rises, your Toyota fan clutch would also engage the fan, causing it to rotate faster. And when the temperature falls such that a cooling fan is no longer needed, the clutch would partly disengage the fan, causing it to turn slower.

Because your Toyota fan clutch is a very important component of your Toyota fan, it should always be in good working condition. If damaged is detected and you think it really calls for a replacement, have it replaced right away then. Here at Parts Train, you can find a wide range of fan clutches for every vehicle make and model, so for sure, you’ll be able to get the right Toyota fan clutch for whatever Toyota model you have.

Featured Products
Fan Clutch
FAN CLUTCH -- Thermal design; Standard rotation; 6.65 in. Overall Diameter, .63/1.81 in. Pilot Diameter / Thread Size, .81 in. Pilot Depth, 3.07 in. Flange or Hex Diameter, 2.7 in. Fan Mount Height, 5.35 in. Fan Hole Bolt Circle, 4.09 in. Fan Mount Diameter, 3.39 in. Overall Height; A high quality, direct fit OE replacement fan clutch; Covered by a 1-year unlimited mileage warranty.
  • Brand: Replacement
Price: $53.90
Fan Clutch
FAN CLUTCH -- Thermal design; Standard rotation; 5.85 in. Overall Diameter, 0.63 in. Pilot Diameter / Thread Size, 0.75 in. Pilot Depth, 3.07 in. Flange or Hex Diameter, 1.96 in. Fan Mount Height, 4.8 in. Fan Hole Bolt Circle, 4.09 in. Fan Mount Diameter, 2.48 in. Overall Height; A high quality, direct fit OE replacement fan clutch; Covered by a 1-year unlimited mileage warranty.
  • Brand: Replacement
  • Type: Clearance
Price: $21.38
Fan Clutch
HAYDEN FAN CLUTCH -- Standard-duty thermal design, 6.65 in. overall diameter, 0.63/1.81 in. pilot diameter, 2.44 in. fan mount height, 5.35 in. fan bolt circle, M6 x 1.0 hole 4 bolt and nut threads, standard rotation; Turns fan 60-70 percent of shaft when engaged and 20-30 percent when disengaged; Used with lighter 1-1/2 in. pitch fans; Flat plate impeller design with 11.4 sq. in. of working surface; Identified by a smooth steel faceplate and thermal spring assembly on the front side; With Hayden's limited 5-year/50,000 miles warranty.
  • Brand: Hayden
Price: $58.08
Fan Clutch
HAYDEN FAN CLUTCH -- Standard-Duty Thermal Design, Standard Rotation, 5.85 in. Overall Diameter, 0.63 in. Pilot Diameter, 1.96 in. Fan Mount Height, 4.80 in. Fan Bolt Circle, M6x1.0 Hole4 Bolt/Nut Threads, Varies The Fan Speed With Temperature Of The Air Behind The Radiator, Engaged High Speed Operation Provides Maximum Cooling, Disengaged Low Speed Operation Provides Fuel Savings And Noise Reduction, Offers Greater Life Expectancy Than A Non-Thermal Clutch, Briefly Engaged At Cold Start-Up, Engages At About 170 Degrees Radiator Air Temperature About 30 Degrees Lower Than Coolant Temperature, With Hayden's Limited 1-Year Warranty
  • Brand: Hayden
Price: $45.29
Fan Clutch
FAN CLUTCH, THERMAL -- Greater Life Expectancy Than A Non Thermal Clutch, Restore Your Vehicles Cooling Efficiency, Helps Reduce The Drain Of Engine Horsepower
  • Brand: Hayden
Price: $58.05

 

Bill Me Later