Jeep Radiator Fan Clutch

Featured Models

Home > Shop By Department > Fan Clutch > Jeep Radiator Fan Clutch

The Jeep’s radiator is one of the most familiar automobile parts under your vehicle’s hood that you get to see from time to time. This is probably because part of your routine maintenance is to fill in the radiator with water. The Jeep radiator is one of the essential part of the vehicle’s cooling system. It helps this system in maintaining the right engine temperature by dispersing the excess heat produced during the combustion process. Most of the times the radiator gets too hot and necessary precautions should be undertaken in dealing with it. Nevertheless, the radiator is also being aided by its components to efficiently perform its task.

Among the parts that help the radiator dissipate heat is the radiator fan. Your Jeep may have at least one radiator fan that is installed at the back of the radiator. Other types of vehicles may have additional radiator fans to aid in cooling other parts such as the a/c condenser and its components. It follows then that the radiator fan must rotate at the correct speed to properly draw air into the radiator. Likewise, the radiator fan must slow down when it is not needed to reduce fuel consumption. This mechanism is achieved through the use of Jeep fan clutch.

The Jeep fan clutch is an automatic device located in front of the water pump and is among the integral parts of the cooling system. It is made of viscous couplings which are combined with a bi-metallic sensory system. Once the engine is cool the Jeep fan clutch partially disengages the radiator fan but when the temperature is beyond the pre-determined setting, the Jeep fan clutch fully engage the radiator fan to rotate thus lowering the engine temperature. Indeed, the importance of the Jeep fan clutch is a thing that can never be set aside. So, always make sure that your Jeep fan clutch is in good condition.

However, if your Jeep fan clutch is seriously damaged and is already beyond repair get its replacement here at Parts Train. Reliable and top quality fan clutches are made available to you by Parts Train where you can surely pick out the perfect Jeep fan clutch for your vehicle. You do not have to leave the comfort of your home or office in shopping with us since you are provided with the most efficient and convenient way of purchasing your fan clutch through our online ordering system. If you opt to be personally assisted, feel free to call any of our friendly customer service representatives through our toll-free numbers. Order now and the next thing you will know is that your new Jeep fan clutch is already right at your doorsteps.

Featured Products Fan Clutch HAYDEN FAN CLUTCH -- Standard-Duty Thermal Design, Reverse Rotation, 6.00 in. Overall Diameter, 0.63 in. Pilot Diameter, 1.53 in. Fan Mount Height, 3.25 in. Fan Bolt Circle, 5/16-18 Hole 4 Bolt And Nut Threads, Varies The Fan Speed With Temperature Of The Air Behind The Radiator, Engaged High Speed Operation Provides Maximum Cooling, Disengaged Low Speed Operation Provides Fuel Savings And Noise Reduction, Offers Greater Life Expectancy Than A Non-Thermal Clutch, Briefly Engaged At Cold Start-Up, Engages At About 170 Degrees Radiator Air Temperature About 30 Degrees Lower Than Coolant Temperature, With Hayden's Limited 1-Year Warranty Brand: Hayden Price: $42.35 Fan Clutch HAYDEN FAN CLUTCH -- Severe-Duty Thermal Design, Reverse Rotation, 6.45 in. Overall Diameter, M30x1.5 Right Pilot Diameter, 1.25 in. Fan Mount Height, 3.25 in. Fan Bolt Circle, 5/16-18 Hole 4 Bolt And Nut Threads, Turns The Fan 80-90% Of The Shaft Speed When Engaged And 20-30% When Disengaged, Used With 2-1/2 in. Deeper Pitch Fans, Features Land And Groove Design With Up To 72 Square Inch Of Working Area, Larger Working Surface Provides Cooler Running And Longer Life Expectancy, And Thicker Body And Deep Finned Faceplate Dissipate More Heat, Can Be Used In Place Of Many Heavy-Duty Clutches, With Hayden's Limited 5-Year Warranty Brand: Hayden Price: $66.95 Fan Clutch HAYDEN FAN CLUTCH -- Standard-Duty Thermal Design, Standard Rotation, 7.23 in. Overall Diameter, 0.63 in. Pilot Diameter, 1.53 in. Fan Mount Height, 3.25 in. Fan Bolt Circle, 5/16-18 Hole 4 Bolt And Nut Threads, Varies The Fan Speed With Temperature Of The Air Behind The Radiator, Engaged High Speed Operation Provides Maximum Cooling, Disengaged Low Speed Operation Provides Fuel Savings And Noise Reduction, Offers Greater Life Expectancy Than A Non-Thermal Clutch, Briefly Engaged At Cold Start-Up, Engages At About 170 Degrees Radiator Air Temperature About 30 Degrees Lower Than Coolant Temperature, With Hayden's Limited 1-Year Warranty Brand: Hayden Price: $32.23 Fan Clutch FAN CLUTCH, THERMAL -- Greater Life Expectancy Than A Non Thermal Clutch, Restore Your Vehicles Cooling Efficiency, Helps Reduce The Drain Of Engine Horsepower Brand: Hayden Price: $33.53 Fan Clutch FAN CLUTCH, THERMAL -- Greater Life Expectancy Than A Non Thermal Clutch, Restore Your Vehicles Cooling Efficiency, Helps Reduce The Drain Of Engine Horsepower Brand: Hayden Price: $33.53