Ford Fan Clutch

Considered as a major part of your vehicle’s cooling system, the radiator is a heat exchanger mechanism that’s responsible for cooling the engine the moment it arrives at its operating temperature. To ensure optimum performance from your Ford radiator, Ford engineers have equipped their vehicles with some other components that will help the radiator in doing its job. These includes automotive radiator fan, which rotates swiftly to provide enough air to help cool the engine. The said fan usually comes with four blades or more and is installed between the radiator and the engine to allow outside air.

Radiator fans aren’t that efficient until the introduction of the fan clutch. It is a small fluid coupling featuring a thermostatic mechanism and is aimed to control a vehicle’s variable-speed fan. Fan clutch ensures that the fan is turning at the right speed to prevent the engine from overheating and to decrease drive to the fan once it is no longer required. And for that very purpose, the fan clutch is made with fluid coupling that’s partly filled with silicone oil.

As soon as the temperature of the air passing through the radiator increases, the heat tells a bimetal coil spring to expand or “uncoil”. During the uncoiling or expansion of the coil spring, a little more oil is allowed to enter the fluid coupling before it will start to operate and turn the fan. The opposite thing happens if the air that passes through the radiator is cool. The coil spring doesn’t expand but contracts, causing the oil to depart from the fluid coupling and consequently slowing down the rotation of the fan.

Fan clutch is necessary since regulating the fan rotation when it isn’t needed significantly decreases fuel consumption, generates less noise and greatly saves engine power. Because of its many benefits, your Ford fan clutch should not be taken for granted. The moment it becomes defective, better look for replacement right away. The finest Ford fan clutch replacement is available at Parts Train. Here, you’ll find only top quality Ford auto parts and accessories including Ford fan clutch. Parts Train has been in the industry for so long and its long years of company experience have made it an expert in providing you top of the line Ford automotive parts, particularly Ford fan clutch.

Featured Products

Fan Clutch

FAN CLUTCH -- Thermal design; Reversed rotation; 6.45 in. Overall Diameter, M30x1.5 Right in. Pilot Diameter / Thread Size, 0.7 in. Pilot Depth, 1.44 [36M] Hex in. Flange or Hex Diameter, 1.5 in. Fan Mount Height, 3.25 in. Fan Hole Bolt Circle, 2.62 in. Fan Mount Diameter, 3.52 in. Overall Height; A high quality, direct fit OE replacement fan clutch; Covered by a 1-year unlimited mileage warranty.

Brand: Replacement
Type: Clearance

Fan Clutch

FAN CLUTCH -- Thermal design; Standard rotation; 6.45 in. Overall Diameter, M30x1.5 Left in. Pilot Diameter / Thread Size, 0.7 in. Pilot Depth, 1.44 [36M] Hex in. Flange or Hex Diameter, 2.76 in. Fan Mount Height, 3.25 in. Fan Hole Bolt Circle, 2.62 in. Fan Mount Diameter, 4.78 in. Overall Height; A high quality, direct fit OE replacement fan clutch; Covered by a 1-year unlimited mileage warranty.

Brand: Replacement
Type: Clearance

Fan Clutch

HAYDEN FAN CLUTCH -- Severe-Duty Thermal Design, Reverse Rotation, 6.45 in. Overall Diameter, M30x1.5 Right in. Pilot Diameter, 2.42 in. Fan Mount Height, 3.25 in. Fan Bolt Circle, 5/16-18 Hole 4 Bolt And Nut Threads, Turns The Fan 80-90% Of The Shaft Speed When Engaged And 20-30% When Disengaged, Used With 2-1/2 in. Deeper Pitch Fans, Features Land And Groove Design With Up To 72 Square Inch Of Working Area, Larger Working Surface Provides Cooler Running And Longer Life Expectancy, And Thicker Body And Deep Finned Faceplate Dissipate More Heat, Can Be Used In Place Of Many Heavy-Duty Clutches, With Hayden's Limited 5-Year Warranty

Brand: Hayden

Fan Clutch

HAYDEN FAN CLUTCH -- Severe-Duty Thermal Design, Reverse Rotation, 6.45 in. Overall Diameter, M30 1.5 Right Pilot Diameter, 1.25 in. Fan Mount Height, 3.25 in. Fan Bolt Circle, 5/16-18 Hole 4 Bolt And Nut Threads, Turns The Fan 80-90% Of The Shaft Speed When Engaged And 20-30% When Disengaged, Used With 2-1/2 in. Deeper Pitch Fans, Features Land And Groove Design With Up To 72 Square Inch Of Working Area, Larger Working Surface Provides Cooler Running And Longer Life Expectancy, And Thicker Body And Deep Finned Faceplate Dissipate More Heat, Can Be Used In Place Of Many Heavy-Duty Clutches, With Hayden's Limited 5-Year Warranty

Brand: Hayden

Fan Clutch

HAYDEN THERMAL FAN CLUTCH -- Standard Rotation, Varies The Fan Speed With Temperature Of The Air Behind The Radiator, Engaged High Speed Operation Provides Maximum Cooling, Disengaged Low Speed Operation Provides Fuel Savings And Noise Reduction, Offers Greater Life Expectancy Than A Non-Thermal Clutch, Briefly Engaged At Cold Start-Up, Engages At About 170 Degrees Radiator Air Temperature About 30 Degrees Lower Than Coolant Temperature, With Hayden's 5-Year Or 50,000 Miles Limited Warranty

Brand: Hayden