Mini Exhaust

Just like the human body, automobiles also need to take out the chemicals and substances (waste) after it was used during the combustion process (digestion) of the gasoline intake (food intake). Otherwise, possible internal problems that might lead to serious and bigger problems can be encountered. An automotive exhaust system is composed of different parts which basically include the following: air pump, catalytic converter, cylinder head, EGR valve, exhaust manifold gasket, exhaust manifold, exhaust port, muffler, PCV valve, resonator, and tailpipe.

The whole exhaust system process starts with the exhaust manifold from the engine. The hot exhaust gases flowing from the manifold going is directed to the front or header pipe. It then passes through the catalytic converter to change the unburned hydrocarbons or fuel and carbon monoxide into water vapor to become less harmful substance or by product. The gas then passes through the hot converter which is then changed by the stainless steel case of the converter known as the ceramic honeycomb coated with a thin layer of platinum. After which, the gas flows to the remaining components of the exhaust system, goes through the tailpipe and finally out of the muffler.

Many performance cars nowadays like some Mini automobiles use dual converters and dual exhaust systems for the purpose of letting more gasses out of the engine. While most of the vehicles undergo the above discussed simple process, there are others that use a secondary muffler called resonators for additional effect and look. Since the whole structure becomes a bit bulkier than the original exhaust system, clamps and rubber mounts called hangers are being used to support the exhaust system under the vehicle, keeping it from dismounting and falling off.

Should you need Mini exhaust replacement products, you can start browsing our comprehensive catalog for detailed information and accurate specifications regarding our products. Here at Parts Train, we carry the widest array of premium quality exhaust components especially Mini exhaust. We also offer great deals of other parts and accessories for all your automotive needs. To top it all, we will provide you with the best customer service for optimum satisfaction. Check it out now!

Featured Products

Exhaust Manifold

EXHAUST MANIFOLD, LEFT -- A High Quality, Direct Fit OE Replacement For Exhaust Manifold; Covered by a 1-year unlimited mileage warranty.

Brand: Replacement
Location: Driver Side
Type: Clearance

Exhaust System - Stainless Steel

MAGNAFLOW STAINLESS STEEL CAT-BACK EXHAUST SYSTEM -- 2.5 in. Extension Pipe Diameter, 3.5 in. Tubing O.D. Size, 3.5 in. Tip O.D. Size, Rear Exit Position, Dual System, Includes 4 in. X 9 in. X 11 in. Muffler And Dual Polished Stainless Steel Tips, Made Of 100% Tough And Durable Stainless Steel, Dyno Tested And Proven To Provide Performance Gains In Horsepower And Torque, Delivers Great Sound With A Smooth And Deep Tone, Built To Last, All Welded, Mandrel Bent, Complies With Most State And Federal Laws, Designed And Tested To Meet Legal Sound Level Limits, Easy To Install, With Magnaflow's Limited Lifetime Warranty

Brand: Magnaflow
Material: Stainless Steel
Exit: Rear

Exhaust System

MAGNAFLOW STAINLESS STEEL CAT-BACK EXHAUST SYSTEM -- 2.25 in. Tubing O.D. Size, 4 in. Tip O.D. Size, Rear Exit Position, Single System, Includes 6 in. X 6 in. X 14 in. Muffler And Polished Stainless Steel Tip, Made Of 100% Tough And Durable Stainless Steel, Dyno Tested And Proven To Provide Performance Gains In Horsepower And Torque, Delivers Great Sound With A Smooth And Deep Tone, Built To Last, All Welded, Mandrel Bent, Complies With Most State And Federal Laws, Designed And Tested To Meet Legal Sound Level Limits, Easy To Install, With Magnaflow's Limited Lifetime Warranty

Brand: Magnaflow

Exhaust System

MAGNAFLOW STAINLESS STEEL CAT-BACK EXHAUST SYSTEM -- 2.5 In./2.25 in. Tubing O.D. Size, 3.5 in. Tip O.D. Size, Rear Exit Position, Dual System, Includes 4 in. X 9 in. X 11 in. Muffler And Dual Rolled/Bell Polished Stainless Steel Tips, Made Of 100% Tough And Durable Stainless Steel, Dyno Tested And Proven To Provide Performance Gains In Horsepower And Torque, Delivers Great Sound With A Smooth And Deep Tone, Built To Last, All Welded, Mandrel Bent, Complies With Most State And Federal Laws, Designed And Tested To Meet Legal Sound Level Limits, Easy To Install, With Magnaflow's Limited Lifetime Warranty

Brand: Magnaflow

Performance Exhaust System - Natural - Stainless Steel

MAGNAFLOW CAT-BACK EXHAUST SYSTEM, STAINLESS STEEL, NATURAL FINISH -- Complies with most state and federal laws; Designed and tested to meet legal sound level limits; Increases horsepower on an average range of 10 percent; 2.5 in. main piping diameter; Dual rear exit; Single inlet and outlet muffler configuration; Includes installation hardware, 5 in. x 8 in. x 14 in. polished stainless steel muffler, and dual 3.5 in. polished T-304 stainless steel tips with round shape, straight-cut, and rolled edge design; Made of 100 percent tough and durable stainless steel; Dyno tested and proven to provide performance gains in horsepower and torque; Delivers great sound with a smooth and deep tone; Built to last, all welded, and mandrel-bent; Easy installation; With Magnaflow's limited lifetime warranty.

Brand: Magnaflow
Finish: Natural
Material: Stainless Steel
Series: Performance