Daewoo Exhaust |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Home >
Shop By Department >
Exhaust >
Daewoo Exhaust |
|
Daewoo Exhaust |
For sure, you will not think much of your vehicle’s exhaust when planning to modify your ride. Most owners focus much on the vehicle’s engine and body panels. However, you should know that the modifications done on the exhaust system can really make a difference because they prove to be very advantageous. Hence, your Daewoo vehicle’s exhaust should not be ignored.
The exhaust system of your Daewoo does the job of transmitting burnt gases from the internal combustion engine and it often has a set of pipes. In most automotive applications, the exhaust system simply pushes waste gases out of the engine. Depending on the overall design of the system, the exhaust gas can flow via a turbocharger in order to boot engine power, through a catalytic converter to significantly lessen air pollution and via a muffler so that noise can be reduced.
The exhaust system starts with the exhaust manifold. In many production engines, the exhaust manifold is a mechanism designed to bring together the exhaust gas sourced from several cylinders and put the said flows in a single pipe. The hot gases will flow from the intake manifold via the front or header pipe into the catalytic converter. The catalytic converter is then responsible for converting unburned fuel and carbon monoxide into water vapor and carbon dioxide that’s less harmful. Found inside the stainless steel case of the catalytic converter is a ceramic honeycomb that’s coated with a thin layer of platinum. When the hot gasses flow through the catalytic converter, they are converted into safer emissions. Many performance vehicles employ dual exhaust systems and dual converters to drive more gases out of the engine. From the catalytic converter, the exhaust will flow to the muffler by means of another pipe. In most vehicles, the exhaust will then flow out of the tailpipe but on vehicles with a resonator. Clamps and hangers are the ones holding the exhaust system under the vehicle.
There are also high performance vehicles that are equipped with a header in their exhaust system. A header specifically means improved manifold designed for performance. While designing, engineers will make a manifold without considering weight or cost but the optimal flow of the exhaust gases. The design of the header results to a unit that’s more capable of scavenging the exhaust from the engine’s cylinders. Generally, headers are made by aftermarket auto-part manufacturers. For those who love custom-designed vehicle, the good news is, the exhaust of your car is one system that can be custom built.
For good-quality and highly-reliable Daewoo exhaust system components, you can visit Parts Train. It is an online auto-part shop that carries not just top-quality Daewoo exhaust parts but also other auto parts and accessories. Here at Parts Train, you can get aftermarket and replacement Daewoo exhaust system components that come from world-class auto-part makers. Hence, you are assured of the product’s superb craftsmanship.
|
|
 Featured Products |
Daewoo Leganza - Exhaust Tip Exhaust Tip - Chrome Polished - Stainless > Stainless Steel
"GIBSON EXHAUST TIP, SLASH, STAINLESS, SOLD INDIVIDUALLY -- Dimensions 2.5 Clamp-On Inlet, 3 Slash-Cut Outlet, 8" Overall Length, Made Of High Quality 100% Polished 304 Stainless Steel Which Delivers The Brilliant Show Look And Will Not Chip, Flake Or Rust Like Chrome, Features An Exclusive Built-In Clamp At The End Of Each Tip, Hassle Free Installation, Provides A Very Clean Custom Look"
- Brand: Gibson
- Finish: Chrome Polished
- Material: Stainless > Stainless Steel
- Series: Exhaust Tip
- 1999,2000,2001 - 4Cyl 2.2L SX
- 1999,2000,2001,2002 - 4Cyl 2.2L CDX
- 1999,2000,2001,2002 - 4Cyl 2.2L S/E
|
Daewoo Nubira - Exhaust Tip Exhaust Tip - Chrome Polished - Stainless > Stainless Steel
"GIBSON EXHAUST TIP, SLASH, STAINLESS, SOLD INDIVIDUALLY -- Dimensions 2.5 Clamp-On Inlet, 3 Slash-Cut Outlet, 8" Overall Length, Made Of High Quality 100% Polished 304 Stainless Steel Which Delivers The Brilliant Show Look And Will Not Chip, Flake Or Rust Like Chrome, Features An Exclusive Built-In Clamp At The End Of Each Tip, Hassle Free Installation, Provides A Very Clean Custom Look"
- Brand: Gibson
- Finish: Chrome Polished
- Material: Stainless > Stainless Steel
- Series: Exhaust Tip
- 1999 - 4Cyl 2.0L SX
- 1999,2000,2001,2002 - 4Cyl 2.0L CDX
- 2000,2001,2002 - 4Cyl 2.0L S/E
|
Daewoo Lanos - Exhaust Tip Exhaust Tip - Chrome Polished - Stainless > Stainless Steel
"GIBSON EXHAUST TIP, SLASH, STAINLESS, SOLD INDIVIDUALLY -- Dimensions 2.5 Clamp-On Inlet, 3 Slash-Cut Outlet, 8" Overall Length, Made Of High Quality 100% Polished 304 Stainless Steel Which Delivers The Brilliant Show Look And Will Not Chip, Flake Or Rust Like Chrome, Features An Exclusive Built-In Clamp At The End Of Each Tip, Hassle Free Installation, Provides A Very Clean Custom Look"
- Brand: Gibson
- Finish: Chrome Polished
- Material: Stainless > Stainless Steel
- Series: Exhaust Tip
- 1999,2000 - 4Cyl 1.6L S/E
- 1999,2000 - 4Cyl 1.6L SX
- 1999,2000,2001,2002 - 4Cyl 1.6L S
- 2001,2002 - 4Cyl 1.6L Sport
|
Daewoo Leganza - Exhaust Tip Exhaust Tip - Chrome Polished - Stainless > Stainless Steel
"GIBSON EXHAUST TIP, ROLLED, STAINLESS, SOLD INDIVIDUALLY -- Dimensions 2.25 Clamp-On Inlet, 3 Straight Round Rolled-Edge Outlet, 6" Overall Length, Made Of High Quality 100% Polished 304 Stainless Steel Which Delivers The Brilliant Show Look And Will Not Chip, Flake Or Rust Like Chrome, Features An Exclusive Built-In Clamp At The End Of Each Tip, Hassle Free Installation, Provides A Very Clean Custom Look"
- Brand: Gibson
- Finish: Chrome Polished
- Material: Stainless > Stainless Steel
- Series: Exhaust Tip
- Tip Shape: Round
- 1999,2000,2001 - 4Cyl 2.2L SX
- 1999,2000,2001,2002 - 4Cyl 2.2L CDX
- 1999,2000,2001,2002 - 4Cyl 2.2L S/E
|
Daewoo Nubira - Exhaust Tip Exhaust Tip - Chrome Polished - Stainless > Stainless Steel
"GIBSON EXHAUST TIP, ROLLED, STAINLESS, SOLD INDIVIDUALLY -- Dimensions 2.25 Clamp-On Inlet, 3 Straight Round Rolled-Edge Outlet, 6" Overall Length, Made Of High Quality 100% Polished 304 Stainless Steel Which Delivers The Brilliant Show Look And Will Not Chip, Flake Or Rust Like Chrome, Features An Exclusive Built-In Clamp At The End Of Each Tip, Hassle Free Installation, Provides A Very Clean Custom Look"
- Brand: Gibson
- Finish: Chrome Polished
- Material: Stainless > Stainless Steel
- Series: Exhaust Tip
- Tip Shape: Round
- 1999 - 4Cyl 2.0L SX
- 1999,2000,2001,2002 - 4Cyl 2.0L CDX
- 2000,2001,2002 - 4Cyl 2.0L S/E
|
|
|
|
|
|
|
|
Back to Top
