Your car’s exhaust system is composed of tubing and other parts that transport the engine’s exhaust gases from the engine to the tailpipe. These waste products are harmful not just to human beings but also to the environment. That’s why majority of late-model automobiles have an exhaust system composed of one or two exhaust manifolds, one catalytic converter and one or two mufflers. Other components that make up your vehicle’s exhaust system are cylinder head, air pump, oxygen sensor, EGR valve, exhaust manifold gasket, exhaust port, muffler, PCV valve and resonator.

As a car owner, it is important to know how the components in your car exhaust system work. Attached to the cylinder head, the exhaust manifold gets each cylinder exhaust, combining it into one pipe. There is variety of exhaust manifolds for you to choose from. They can be made of aluminum, steel, stainless steel or cast iron. Also a component of your car’s exhaust system, oxygen sensor is used to gauge the amount of oxygen present in the exhaust. All modern fuel injected cars are outfitted with oxygen sensors. These are usually installed if not in the exhaust manifold, in places near to it in the exhaust pipe.

Among the most integral parts of the exhaust system, catalytic converter significantly converts hazardous carbon monoxide and hydrocarbons to water vapor and carbon dioxide. They can be found between the muffler and the exhaust manifold. There are also catalytic converters that reduce dangerous nitrogen oxides. And not to be overlooked are the muffler which works to calm the exhaust to tolerable levels. Since combustion process involves a series of explosions producing too much noise, we should always be thankful that manufacturers included a muffler in the car’s exhaust system.

Furthermore, exhaust pipe is the component that transports the exhaust gases through their trip out of the tail pipe. For longer-lasting exhaust tubing, consider those that are made of stainless steel or aluminized steel tubing. Aluminized steel possess better rust resistance than plain steel and it comes cheaper than stainless steel. However, stainless steel exhaust pipes have the best corrosion resistance.

Chevrolet is among the vehicle makes that are equipped with well-integrated and excellently-performing exhaust system. Living up to their dedication in giving the industry with vehicles of unmatched dependability, Chevrolet makes sure that their vehicles exhaust system are rust-resistant and are properly working. But due to regular use, especially for short distance trips, your Chevrolet exhaust system will eventually wear out due to corrosion. Auto accidents can also be the reason why we sometimes end up looking for a Chevrolet exhaust system replacement.

In such cases the finest replacement for your Chevrolet exhaust system could be found at Parts Train. Available here are various kinds of exhaust system that are believed to be of highest quality and best-performing. Perfect for your Chevrolet Camaro, Chevette, El Camino, Impala, Malibu, Suburban, Astro, Avalanche and any other Chevy models are high quality Chevrolet exhaust system from Parts Train.

Featured Products

Chevy - Performance Exhaust System - Polished - Stainless Steel

MAGNAFLOW CAT-BACK EXHAUST SYSTEM, STAINLESS STEEL, POLISHED -- Complies with most state and federal laws; Designed and tested to meet legal sound level limits; Increases horsepower on an average range of 10 percent; 3 in. main piping diameter, 3 in. tail pipe diameter; Dual rear exit; Single inlet and dual outlet muffler configuration; Includes installation hardware, 5 in. x 8 in. x 18 in. polished stainless steel muffler, and dual 3.5 in. polished stainless steel tips with round shape, straight cut, and non-rolled edge design; Made of 100 percent tough and durable stainless steel; Dyno tested and proven to provide performance gains in horsepower and torque; Delivers great sound with a smooth and deep tone; Built to last, all welded, and mandrel-bent; Easy weld-on installation.

Brand: Magnaflow
Finish: Polished
Material: Stainless Steel
Series: Performance

Chevy - Performance Exhaust System - Stainless Steel

MAGNAFLOW PERFORMANCE SERIES DIESEL TURBO-BACK EXHAUST SYSTEM -- 50-state legal; Designed specifically to meet California Air Resources Board standards; Legal for sale or use in California; 5 in. Tubing O.D. Size, 6 in. Tip O.D. Size, Rear Side Exit Position, Single System, This Is Magnaflow's Premium Line Exhaust System, Features A Fully Welded Giant And Fast-Flowing Mandrel-Bent Stainless Steel Tubing And Polished Stainless Steel Double Wall Tip, Incorporates Mirror Finished Magnaflow Performance Mufflers With A Straight-Through Design, Dyno Tested And Proven To Provide Performance Gains In Horsepower And Torque, Delivers Great Sound With A Smooth And Deep Tone, Built To Last, Easy To Install, With Magnaflow's Limited Lifetime Warranty

Brand: Magnaflow
Material: Stainless Steel
Series: Performance
Exit: Side

Chevy - Performance Exhaust System - Stainless Steel

MAGNAFLOW STAINLESS STEEL CROSSMEMBER-BACK EXHAUST SYSTEM -- 50-state legal; Designed specifically to meet California Air Resources Board standards; Legal for sale or use in California; 2.5 in. Tubing O.D. Size, Rear Exit Position, Dual System, Includes 4 in. X 9 in. X 14 in. Muffler, Made Of 100% Tough And Durable Stainless Steel, Dyno Tested And Proven To Provide Performance Gains In Horsepower And Torque, Delivers Great Sound With A Smooth And Deep Tone, Built To Last, All Welded, Mandrel Bent, Complies With Most State And Federal Laws, Designed And Tested To Meet Legal Sound Level Limits, Easy To Install, With Magnaflow's Limited Lifetime Warranty

Brand: Magnaflow
Material: Stainless Steel
Series: Performance
Exit: Rear

Chevy - Performance Exhaust System - Stainless Steel

MAGNAFLOW STAINLESS STEEL CROSSMEMBER-BACK EXHAUST SYSTEM -- 50-state legal; Designed specifically to meet California Air Resources Board standards; Legal for sale or use in California; 2.5 in. Tubing O.D. Size, 2.5 in. Tip O.D. Size, Rear Exit Position, Dual System, Includes 4 in. X 9 in. X 14 in. Muffler, Tru-X Crossover Pipe, And Dual Polished Stainless Steel Tips, Made Of 100% Tough And Durable Stainless Steel, Dyno Tested And Proven To Provide Performance Gains In Horsepower And Torque, Delivers Great Sound With A Smooth And Deep Tone, Built To Last, All Welded, Mandrel Bent, Complies With Most State And Federal Laws, Designed And Tested To Meet Legal Sound Level Limits, Easy To Install, With Magnaflow's Limited Lifetime Warranty

Brand: Magnaflow
Material: Stainless Steel
Series: Performance
Exit: Rear

Chevy - Performance Exhaust System - Natural - Stainless Steel

MAGNAFLOW STAINLESS STEEL CROSSMEMBER-BACK EXHAUST SYSTEM -- 50-state legal; Designed specifically to meet California Air Resources Board standards; Legal for sale or use in California; 2.5 in. Tubing O.D. Size, 2.5 in. Tip O.D. Size, Rear Exit Position, Dual System, Includes 4 in. X 9 in. X 14 in. Muffler, Tru-X Crossover Pipe, And Dual Polished Stainless Steel Tips, Made Of 100% Tough And Durable Stainless Steel, Dyno Tested And Proven To Provide Performance Gains In Horsepower And Torque, Delivers Great Sound With A Smooth And Deep Tone, Built To Last, All Welded, Mandrel Bent, Complies With Most State And Federal Laws, Designed And Tested To Meet Legal Sound Level Limits, Easy To Install, With Magnaflow's Limited Lifetime Warranty

Brand: Magnaflow
Finish: Natural
Material: Stainless Steel
Series: Performance
Exit: Rear