Engine Gasket Set
FELPRO ENGINE CONVERSION GASKET SET -- Contains rear main seal gasket, water pump gasket, fuel pump gasket, oil pump gasket, timing cover gasket and thermostat gasket; Includes PermaDry molded rubber oil pan gasket; Designed to be high quality direct fit replacements for stock conversion gaskets; Intended for lower block repair; Set contents may vary depending on application; With Felpro's limited 1-year warranty.
|
Engine Long Block
ENGINE LONG BLOCK, REMANUFACTURED -- Non-balance shaft; Includes gasket kit and oil pump; Cylinder block: Magnafluxed for cracks and checked for any visible damage to the block or threaded holes before being repainted to the original color, each cylinder is honed with the specified cross-hatch pattern after the block is bored, decked and chamfered; Crankshaft: Machined on a fully-automated crank grinder for consistency and critical tolerances, given a final wash for cleanliness, all oil galley holes are chamfered and brushed after machining; Connecting rods: Measured against stringent specifications for bend, twist, and center-to-center length, the piston pin bore and bearing bore are measured with air gauges for proper dimensions, installed with new torque-to-yield rod bolts and nuts; Cylinder heads: Resurfaced and completely inspected for any visible damage or cracks, valve seats are machined, inspected and replaced if necessary, valve guides are inspected with an air gauge and replaced if necessary, cam bore is checked and machined if required, used with brand new valves, seals and lifters, all plugs and fittings are replaced with new pieces to protect against possible coolant leaks; This engine is spin tested to ensure proper oil flow, pressure, torque and compression; All sealed units are tested for oil and coolant leaks; With 36-month/100,000 miles warranty when installed in passenger cars, police cars and light trucks.
- Brand: Perfect Fit
- P_condition: Remanufactured
|
Engine Harmonic Balancer
PROFORM HARMONIC BALANCER INSTALLER/PULLER -- Includes 7/16-20, 5/8 in. x 18, 3/4 in. x 16 adapters and various removal hardware; A heavy duty professional tool for engine builders; Fully equipped with roller thrust bearings; Can be used as a universal puller and also for steering wheel and pulley installation and removal; Maximum recommended torque of 150 ft.-lbs.; With Proform's limited 30-day warranty.
|
Engine Management System
AEM PEAK AND HOLD INJECTOR DRIVER -- A Performance Engine Management System, With AEM's Limited Warranty
|
Engine Mount
ENERGY SUSPENSION POLYURETHANE UNIVERSAL MOUNT/ISOLATOR SET, BLACK -- With strong steel rings that are molded-in; Made of unique and technically advanced chemical formulation called hyper-flex; Replaces distorted and worn-out original rubber mounts; Maintains car body-to-frame or truck cab-to-bed alignment far longer than OEM rubber mounts; With Energy Suspension's limited 2-year warranty.
|
