Dodge Grand CaraVan Engine Parts

Featured Years

• 2007, 2006, 2005, 2004, 2003, 2002, 2001, 2000, 1999, 1998, 1997, 1996, 1995, 1994, 1993, 1992, 1991, 1990, 1989, 1988

Home > Shop By Department > Engine Parts > Dodge > Dodge Grand CaraVan Engine Parts

Vehicles are made up of wide variety of systems that work with one another to make your driving machine move. Basically, this is comparable to a human body that is made up of correlated parts that should be on good condition at all times in order to perform their function well. Bear in mind that any part that begins to malfunctions can harmfully affect the overall performance. In due of this, Dodge had strived hard to give every owner top-caliber parts that let your deliver its best performance at all times.

In case of your Dodge Grand Caravan, among the most essential parts are those that are engine related. These Dodge Grand Caravan engine parts include the intake manifold, oil filter, crankshaft pulley, carburetor mount, engine block, intake crossover tube, left and right cylinder head, timing chain and valve cover that are all involved in the entire combustion process which is needed to produce the desired amount of power that is necessary to propel the wheels.

You may ask how this system works; basically, it is made up of three major parts which includes the pistons, crankshaft and valve train. These parts are responsible in converting the mixture of air and fuel into rotary motion. Almost all modern kinds of engine is made up of 4, 6 or 8 pistons in each cylinder. These pistons move up and down twice in order to complete one cycle. This action is further known as the compression stroke, power stroke, intake stroke, and exhaust stroke. In regards to the intake stroke, the camshaft opens the intake valve while the pistons shift the cylinder downward. The moment when the pistons start to move up, the intake valve will then closes the mixture of fuel and air in the combustion chamber therefore causing it to condense. On the other hand, the pistons will persist in move up the cylinder and pack together the mixture while at the same time the spark plug prepares to ignite it.

Because of the function played by the Dodge Grand Caravan engine parts, it is needed that you conduct regular maintenance and inspection to ensure their performance at all times. You can ask the help of a mechanic if you are not very sure about the process. He can do a little tweak or repair if needed but if in case he had found at that replacement is necessary, better do it right ahead. You can look for a replacement here at Parts Train if you want to save much amount of cash. Plus, by ordering from us, you can shop right at the comfort of your own homes.

Featured Products Engine Long Block MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, 6 bolt flywheel, flat tappet; Comes complete with adjusted valve train components, gasket set and new oil pump; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship. Brand: Marshall Engines P_condition: Remanufactured Price: $1,222.78 Core: $275.00 Engine Long Block MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, FWD; Comes complete with adjusted valve train components, gasket set and new oil pump; With jet valves, mechanical rocker arms, and balance shaft elimination kit; Without pulse air; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; This purchase includes Marshall Engine's Extra Protection Warranty, special protection for your engine against overheating, lack of lubricant, contamination, detonation, pre-ignition, dry start, melted pistons and foreign object contaminations; The Extra Protection Warranty is an addition to the comprehensive protection against failures in parts and workmanship. Brand: Marshall Engines P_condition: Remanufactured Price: $914.00 Core: $430.00 Premium Long Block Engine Long Block MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, FWD; Comes complete with adjusted valve train components, gasket set and new oil pump; With jet valves, mechanical rocker arms, 1 pulse air tube left-rear of block and balance shaft elimination kit; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; Ships within 7-10 days; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks. Brand: Marshall Engines P_condition: Remanufactured Series: Premium Long Block Price: $1,363.79 Core: $400.00 Premium Long Block Engine Long Block MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, FWD; Comes complete with adjusted valve train components, gasket set and new oil pump; With 1 pulse air tube left-rear of block and balance shaft elimination kit; Without jet valves; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks. Brand: Marshall Engines P_condition: Remanufactured Series: Premium Long Block Price: $688.08 Core: $400.00 Premium Long Block Engine Long Block MARSHALL ENGINES PREMIUM LONG BLOCK ENGINE, REMANUFACTURED -- SOHC, FWD; Comes complete with adjusted valve train components, gasket set and new oil pump; With jet valves, mechanical rocker arms, and balance shaft elimination kit; Without pulse air; Cylinder heads are bake cleaned and shot blasted; Features high quality seals, installed valves and springs and 3-angled cut on valve seats; 100 percent mag inspected and pressure tested, vacuum tested for perfect seal, decks milled and surface checked, final oil pressure bench-mark tested on OHC heads, camshaft and followers installed; Crankshaft kit includes main and connecting rod bearings and is reground to factory tolerance for size, oil holes are completely chamfered then micro-polished to exceed the original finish ensuring proper bearing lubrication, a final wash is also done to ensure that every crank is clean, bake cleaned then shot blasted, checked for bend and journals polished; Shipped in foam-to-fit packing to protect crank and bearings; With Marshall Engine's 3-year/100,000 mile warranty when installed in passenger cars and light trucks. Brand: Marshall Engines P_condition: Remanufactured Series: Premium Long Block Price: $908.79 Core: $400.00