Buick Commercial Chassis Engine Parts

Get the right Buick Commercial Chassis Engine Parts from Partstrain! Select your vehicle to ensure that you will find the right parts with a perfect fit.


Featured Years

  • 1996, 1995, 1994, 1993, 1992, 1991
Home > Shop By Department > Engine Parts > Buick > Buick Commercial Chassis Engine Parts
Browse our Wide Selection of Buick Commercial Chassis Parts, Buick Engine Parts, and Buick Parts

  Buick Commercial Chassis Catalytic Converters
  Buick Commercial Chassis Exhaust
  Buick Commercial Chassis Mirror
  Buick Commercial Chassis Oxygen Sensors
  Buick Commercial Chassis Towing Mirror



Featured Products
Engine Gasket Set
FELPRO ENGINE CONVERSION GASKET SET -- Contains rear main seal gasket, water pump gasket, fuel pump gasket, oil pump gasket, timing cover gasket and thermostat gasket; Includes PermaDry molded rubber oil pan gasket; Designed to be high quality direct fit replacements for stock conversion gaskets; Intended for lower block repair; Set contents may vary depending on application; With Felpro's limited 1-year warranty.
  • Brand: Felpro
  • Type: Conversion
Price: $63.64
Engine Gasket Set
FELPRO ENGINE CONVERSION GASKET SET -- Contains rear main seal gasket, water pump gasket, fuel pump gasket, oil pump gasket, timing cover gasket and thermostat gasket; Includes PermaDry molded rubber oil pan gasket; Designed to be high quality direct fit replacements for stock conversion gaskets; Intended for lower block repair; Set contents may vary depending on application; With Felpro's limited 1-year warranty.
  • Brand: Felpro
  • Type: Conversion
Price: $60.32
Engine Gasket Set
FELPRO ENGINE GASKET SET -- Contains head gaskets, intake gaskets, exhaust gaskets, valve cover gaskets, oil pan gaskets, valve stem seals and all accessory gaskets; Everything you need for a complete engine rebuild; Set contents may vary depending on application; With Felpro's limited 1-year warranty.
  • Brand: Felpro
  • Type: Full
Price: $106.03
Engine Long Block
ENGINE LONG BLOCK, REMANUFACTURED -- 1 piece seal, center V/C bolts, roller cam vehicles; Includes gasket kit and oil pump; Cylinder block: Magnafluxed for cracks and checked for any visible damage to the block or threaded holes before being repainted to the original color, each cylinder is honed with the specified cross-hatch pattern after the block is bored, decked and chamfered; Crankshaft: Machined on a fully-automated crank grinder for consistency and critical tolerances, given a final wash for cleanliness, all oil galley holes are chamfered and brushed after machining; Connecting rods: Measured against stringent specifications for bend, twist, and center-to-center length, the piston pin bore and bearing bore are measured with air gauges for proper dimensions, installed with new torque-to-yield rod bolts and nuts; Cylinder heads: Resurfaced and completely inspected for any visible damage or cracks, valve seats are machined, inspected and replaced if necessary, valve guides are inspected with an air gauge and replaced if necessary, cam bore is checked and machined if required, used with brand new valves, seals and lifters, all plugs and fittings are replaced with new pieces to protect against possible coolant leaks; This engine is spin tested to ensure proper oil flow, pressure, torque and compression; All sealed units are tested for oil and coolant leaks; With 36-month/100,000 miles warranty when installed in passenger cars, police cars and light trucks.
  • Brand: Perfect Fit
  • P_condition: Remanufactured
Price: $1,235.24
Core: $244.00
Engine Assembly
BLUE PRINT ENGINE ASSEMBLY, DRESSED -- Dyno tested to produce 390 h.p., 395 ft./lbs. of torque, 9.5:1 compression ratio; Includes: Howell multi-port fuel Injection system, Howell modified electronic distributor and coil, Howell fuel pump, Edelbrock satin water pump, MSD plug wires, Signature series aluminum valve covers, brass freeze plugs; Block: 4 bolt main block, square and parallel decked, align honed main bearing bore, cylinders are sonic tested for thickness and honed on a computer controlled machine to within .0002 in. straightness and roundness; Rotating Assembly: new Scat cast crankshaft, new Scat I-beam rods, Keith Black hypereutectic pistons with Hastings moly rings, Melling high volume oil pump, heavy duty double roller timing set, balanced to within 2g on a computerized balancer; Cylinder heads: new Dart aluminum cylinder heads, 1.437 in. diameter valve springs, hardened retainers and springs, 2.02 in. swirl polished intake valves, 1.60 in. swirl polished exhaust valves, hardened push rods; Camshaft Specs: Flat tappet hydraulic lifter, duration at .050 in. lift is 224 intake/230 exhaust and maximum lift of 0.480 in. intake/0.486 in. exhaust, 110 degree lobe separation, ignition timing: 13 to 16 degree initial/34 degree total timing advance; Driver side dipstick sold separately; With Blue Print's 30 month/50,000 mile warranty.
  • Brand: Blue Print
  • P_condition: New
Price: $7,605.56

 

Bill Me Later