Daewoo Engine Mount

Isn’t it too bad whenever you stop at a traffic light and you feel your engine begins to shake, and as soon as you accelerate, you feel your engine starts to shudder and bang around? As soon as you arrive at your house pop the hood open and look around your vehicle components. If everything looks okay and there is nothing out of place, check if your engine faces forward with the cooling fan that is driven by a belt. If you notice some marks on the radiator where the fan has been hitting, it’s time to check your Daewoo engine mount and struts before anything else happens such as your accelerator getting stuck open.

Nowadays, engine mounts are not as simple as the ones that are used during the old days when these engine mounts used to be a big slab of rubber that is sandwiched between two chunks of flat steel. These days, these engine mounts are precisely engineered having specific shapes, air gaps called voids, and rubber hardness. There are some engine mounts available which are electronically controlled.

If your Daewoo vehicle is not new anymore and it is likely that your engine mount is probably worn out too. The rubber might probably soak from the oil which is from the leaking valve cover gasket, which you never got to replace. If then you are at about 60,000 and 70,000 mile mark, your Daewoo engine mount likely have twisted out of shape or have some significant cracks from the high engine compartment temperatures.

The mount that is at the front of the engine is the one that takes the most abuse. This mount located at the front of the engine gets pulled up and down as well as back to front and the best way to check it is with the pry bar. Take a look at the rubber as you move it and if the cracks open or has no resistance, it’s time to replace it right away. In the same manner, check the rear, front, and transmission mounts. The rear engine mount is more difficult because of the limited access to it, so just pry the mount by using the two steel plates.

So it would be much better if you replace your damage engine mount with a new one to avoid further significant effects on your vehicle. The over all performance of your Daewoo vehicle may be readily affected, thus you and your passenger’s safety and comfort. Parts Train offers top quality Daewoo engine mounts for your Daewoo vehicle, so shop now and replace your damage engine mount as soon as possible.

Featured Products

Engine Mount

WESTAR ENGINE MOUNT -- OEM Durability And Fit For Easy Installation

Brand: Westar
Location: Front, Passenger Side
Quantitysold: Sold Individually

Engine Mount

ENERGY SUSPENSION POLYURETHANE UNIVERSAL MOUNT/ISOLATOR SET, BLACK -- With strong steel rings that are molded-in; Made of unique and technically advanced chemical formulation called hyper-flex; Replaces distorted and worn-out original rubber mounts; Maintains car body-to-frame or truck cab-to-bed alignment far longer than OEM rubber mounts; With Energy Suspension's limited 2-year warranty.

Brand: Energy Susp

Engine Mount

TRANS-DAPT UNIVERSAL CROSSMEMBER MOTOR MOUNTS -- Without pads; Frame rail from 24 in. to 37 wide center to center between perches is 16.0125 in.; Made with heavy-duty 0.114 in. thick tubing; Fits a wide variety of cars and trucks with open frame rails and straight front axles.

Brand: TransDapt

Engine Mount Kit

TRANS-DAPT UNIVERSAL CROSSMEMBER MOTOR MOUNTS -- Constructed With 0.114 in. Thick Tubing, Complete With Rubber Cushioned Mount Pads, Steel Crossmember Material, Black Painted Crossmember Finish, 24 in.-37 in. Frame Rail Width Range, 16.125 in. Center to Center Perch Distance (in), Mounting Pads Included, Fits A Wide Variety Of Cars And Trucks With Open Frame Rails And Straight Front Axles, With TransDapt's 1-Year Warranty

Brand: TransDapt

Engine Mount Kit

LAKEWOOD MOTOR MOUNT KIT -- This Kit Is Required When Utilizing Stock Motor Mounts on Engines With Part Number 15003, Includes Motor Mount Brackets And Hardware, With Manufacturer's Limited 90-Day Warranty

Brand: Lakewood