Scion Ignition Wire Set
Get the right Scion Ignition Wire Set from Partstrain! Select your vehicle to ensure that you will find the right parts with a perfect fit.
Your Scion can never be operational without having a reliable ignition system that cranks your engine to start its combustion process. The engine must be able to convert the fuel’s chemical energy into mechanical energy in order for your vehicle to run. The prime goal of the ignition system is to ignite the air and fuel mixture at precisely the right instance so that the expanding gases can the maximum amount of work. If it fires at the wrong instance, incremental loss in engine power and fuel consumption will prevail, as well as an increased emission. In order to have optimal ignition operations, all ignition parts must constantly be at their peak working conditions such as the Scion ignition wire set. This is responsible for harnessing the high voltage to the spark plugs. This is a set of insulated and conductive wires that are designed to efficiently carry the high voltage in the ignition system.
The Scion ignition wire set is coupled to the spark plugs and the distributor. It carries and routes the high voltage into the spark plug whenever the engine is started. The spark plug is the electrical device located at the cylinder head which carries the electrical energy. It forces this electricity to jump and arc across the gaps and creates a spark. It can carry at about 40,000 to 100,000 volts. For this reason that it needs an insulated passageway to allow this high voltage to be routed down the electrode, and allow it to jump the gap and be conducted into the engine block.
The ignition wire ensures that the high voltage coming from the spark plug is stable and intact, allowing it to be distributed in the entire ignition system for optimal engine operations. Since the Scion ignition wire set constantly endures that strain in carrying the high voltages, over time, its wear can eventually happen. Its insulation materials can gradually break down which could cause some of the ignition wires to fail.
A defective ignition wire set can cause the high voltage to be routed elsewhere in the engine and will result to total failure of the ignition system. To prevent this from occurring, regular inspection and testing must always be done. Total break down of the ignition wires can result to engine misfiring, fouled spark plugs, rough engine running, poor acceleration, increased fuel consumption, and poor emissions.
When you need to have the best replacement such as the Scion ignition wire set, Parts Train is the right source you can go. We offer you its extensive line of ignition wire set for all Scion models. We also provide other auto parts and accessories where you can access on it through our online catalog.
 Featured Products |
Ignition Wire Set
TAYLOR CABLE UNIVERSAL-FIT 409 PRO RACE IGNITION WIRE SET, BLUE -- 10.4 mm, 0.409 in.; 180 degrees plug boot; Comes with both socket style and HEI distributor boots and appropriate terminal ends; Features a spiral-wound core with 350 ohms per foot resistance for EMI and RFI suppression delivering maximum fire power without radio interference; Provides continuous heat protection up to 600 degrees Fahrenheit and 102,000 Volts dielectric strength; Additional heat and abrasion protection is provided by the 3-Layer 100 percent silicone jacket; Color coordinated low profile 100 percent silicone pro boots feature vibration proof double spring locking spark plug terminals; A high energy and high performance spark plug wire set for multiple-spark discharge and electronic ignition systems; Recommended for extreme under hood temperatures and open wheel racing; With Taylor Cable's limited 90-day warranty.
|
Ignition Wire Set
TAYLOR CABLE UNIVERSAL-FIT PRO WIRE IGNITION WIRE SET, RESISTOR CORE, BLUE -- 8 mm; 90 degrees plug boot; Comes with both socket style and HEI distributor boots with appropriate terminal ends; Engineered with a 2-layer insulation that is made of 100 percent silicone with fiberglass reinforced jacket; Features Taylor's exclusive low profile silicone pro boots featuring vibration proof double spring locking spark plug terminals; Designed to withstand temperatures up to 600 degrees Fahrenheit providing years of extended wire life; Beats its competitors in looks and performance making it the perfect choice for performance vehicles; Distinguished for its core that is an excellent choice for magnetos and point style ignition applications; With Taylor Cable's limited 90-day warranty.
|
Ignition Wire Set
ACCEL CUSTOM FIT 300+ RACE SPARK PLUG WIRE SET, WITH 120 HEMI BOOTS, UNIVERSAL KIT -- 4-3/4 in. long; Includes Male/Female style terminals; Features 600 degree double silicone jacket construction with fully reactive ferrite material which provides a 150 ohms per foot resistance; Provides a spiral wound copper/nickel alloy with stainless steel spark plug terminals for high electrical conductivity; With Accel's limited 1-year warranty.
|
Ignition Wire Set
ACCEL CUSTOM FIT 300+ FERRO-SPIRAL RACE SPARK PLUG WIRE SET -- 8.8 mm, black distributor boot, red spark plug boot; Features a double silicone construction, all-Kevlar stranded inner core, fiberglass braiding, as well as stainless steel and brass terminals; Helps in keeping the wires from being damaged by the heat of the exhaust system; With heat shrink tubing to provide even greater protection from heat, abrasion and flying debris; With Accel's limited 1-year warranty.
|
Ignition Wire Set
ACCEL THUNDERSPORT UNIVERSAL RACE SPARK PLUG WIRE SET, YELLOW -- 5 mm, 90 degree boots; Extremely flexible and offers extreme space and weight savings; The 150 ohms per foot Ferro-Spiral wound alloy conductor delivers maximum energy to the spark plug and provides superior performance; With Accel's limited 1-year warranty.
|
|
|
