Daihatsu Ignition Wire Set |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Home >
Shop By Department >
Ignition Wire Set >
Daihatsu Ignition Wire Set |
Daihatsu Ignition Wire Set |
Your engine’s performance relies mainly on the efficiency of its internal systems, sub-systems, and complex mechanisms. One critical system that greatly influences its peak operations is the ignition system. This works by generating a perfectly timed spark to ignite the fuel and air mixture, allowing the engine to start its combustion process, and produce maximum power, increased fuel economy and emissions. Its failure can cause an appreciable drop in engine performance. In order to carry out its functions effectively, all its working components must be at their top conditions such as the spark plug. This is the device that delivers the high energy spark to be fired and ignite the air-fuel mixture. But for the spark plug to transmit a perfect blast of spark, it must be geared with the Daihatsu ignition wire set.
The Daihatsu ignition wire set is responsible for harnessing the high voltage from the coil or distributor through the spark plug. It is designed to efficiently transfer an electric pulse to the spark plug, which in turn ignites the compressed fuel-air mixture in your engine’s combustion chamber. It can carry virtually any voltage, so your engine can perform at its best even thru extremely rough conditions. The efficiency of the ignition wires have a lot to do when it comes to how your vehicle runs.
As your ignition wires ages, they create resistance and fails to transmit the electric pulse. This is commonly the result from contact corrosion and wear of its insulated coating or jacket. When cracks and breaks are present in the insulated coating, the electric pulse can be directed to other parts of your engine, causing misfires. That is why, it is best to follow the recommended intervals on when and what mileage does it take to replace the ignition wires. Most manufacturers’ recommend replacing it between 50,000 to 60,000 miles of distance traveled. It also a good thing to change the wires whenever you replace the spark plug, tune-up, or replacing other major ignition parts such as the distributor rotor and coil.
Common symptoms of a failing ignition wires include poor idle, engine skip or misfire, poor engine performance under a load or acceleration, a noticeable spark or arcing in the engine compartment. When one or come of these signs are evident in your vehicle, have your ignition wires replaced at once.
Parts Train carries an extensive inventory of high-performance Daihatsu ignition wire set for all Daihatsu model. Simply look in our comprehensive online catalog and get the exact part designed for your model.
|
|
 Featured Products |
Daihatsu Rocky - Ignition Wire Set
- 1990,1991,1992 - 4Cyl 1.6L SE
- 1990,1991,1992 - 4Cyl 1.6L SX
|
Daihatsu Charade - Ignition Wire Set
- 1989 - 3Cyl 1.0L CES
- 1989 - 3Cyl 1.0L CLS
- 1989 - 3Cyl 1.0L CLX
- 1989 - 4Cyl 1.3L CLS
- 1989 - 4Cyl 1.3L CLX
- 1989,1990,1991,1992 - 1.3L L4
- 1990 - 3Cyl 1.0L SX
- 1990,1991,1992 - 3Cyl 1.0L SE
- 1990,1991,1992 - 4Cyl 1.3L SE
- 1990,1991,1992 - 4Cyl 1.3L SX
- Show All Applications
|
Daihatsu Charade - Ignition Wire Set
"PREMIUM IGNITION WIRE SET - Original Equipment Replacement, Designed To Meet Or Exceed Original Manufacturers Specifications, Conductive Silicone Core Delivers Maximum Voltage"
- 1988 - 3Cyl 1.0L "Gas, FI, VIN "0" CSX
- 1988,1989 - 3Cyl 1.0L "Gas, FI, VIN "0" CLS
- 1988,1989 - 3Cyl 1.0L "Gas, FI, VIN "0" CLX
- 1989 - 3Cyl 1.0L "Gas, FI, VIN "0" CES
- 1990 - 3Cyl 1.0L "Gas, FI, VIN "0" SX
- 1990,1991,1992 - 3Cyl 1.0L "Gas, FI, VIN "0" SE
- Show All Applications
|
Daihatsu Charade - Ignition Wire Set
"BECK ARNLEY PREMIUM IGNITION WIRE SET -- A High Quality Replacement Set With OE Form, Fit, And Function"
- 1989 - 4Cyl 1.3L "Gas, FI, VIN "2" CLS
- 1989 - 4Cyl 1.3L "Gas, FI, VIN "2" CLX
- 1990,1991,1992 - 4Cyl 1.3L "Gas, FI, VIN "2" SE
- 1990,1991,1992 - 4Cyl 1.3L "Gas, FI, VIN "2" SX
|
Daihatsu Rocky - Ignition Wire Set
"BECK ARNLEY PREMIUM IGNITION WIRE SET -- A High Quality Replacement Set With OE Form, Fit, And Function"
- 1990,1991,1992 - 4Cyl 1.6L "Gas, FI, VIN "0" SE
- 1990,1991,1992 - 4Cyl 1.6L "Gas, FI, VIN "0" SX
|
|
|
|
|
|
|
|
|
Back to Top
