Front Left Link Arm - Steel STEEL W/ Inner Bushing. PLEASE NOTE : If the Control Arms that need to be replaced are Aluminum, these are no longer available and have been replaced by Steel Control Arms, so you will also need to change the Control Arm Stays, 1-per side, part # 6819079 and the Sway Bar Links, 1-per side, part # 9157725KIT.
Brand:OES Genuine
Location:Front > Front Left
1989 - 2.3L L4
1989 - Base
1989 - GL
Volvo 740 - Front > Front Right Control Arm
Front Right Link Arm - Steel STEEL W/ Inner Bushing. PLEASE NOTE : If the Control Arms that need to be replaced are Aluminum, these are no longer available and have been replaced by Steel Control Arms, so you will also need to change the Control Arm Stays, 1-per side, part # 6819079 and the Sway Bar Links, 1-per side, part # 9157725KIT.
Brand:OES Genuine
Location:Front > Front Right
1989 - 2.3L L4
1989 - Base
1989 - GL
Volvo 740 - Control Arm Bushing
Front Suspension - Outer Bushing - From stay to Control Arm - 2 per Wheel - Urethane This bushing is used on vehicles that have had had the control arm stays and related bushings replaced with service units designed to reduce brake vibrations. The length of these replacement control arm stays (#6819079) is 388.5mm, and these replacement bushings (#6819057) contain a different rubber compound than bushing #1359599. WARNING: These parts must be installed only while there is a load on the front suspension, otherwise damage to the bushings may result! In addition, if the inner bushings on the suspension (bushing #1273235 for the control arm plus the non-replaceable bushing incl. w/ control arm stay #6819079) show ANY signs of wear, they MUST be replaced at the same time. Otherwise, premature failure of the outer bushings can result, which IS NOT covered under warranty!. Front Suspension - Outer Bushing - From stay to Control Arm - 2 per Wheel This bushing is used on vehicles that have had had the control arm stays and related bushings replaced with service units designed to reduce brake vibrations. The length of these replacement control arm stays (#6819079) is 388.5mm, and these replacement bushings (#6819057) contain a different rubber compound than bushing #1359599. WARNING: These parts must be installed only while there is a load on the front suspension, otherwise damage to the bushings may result! In addition, if the inner bushings on the suspension (bushing #1273235 for the control arm plus the non-replaceable bushing incl. w/ control arm stay #6819079) show ANY signs of wear, they MUST be replaced at the same time. Otherwise, premature failure of the outer bushings can result, which IS NOT covered under warranty!. Front Suspension - Outer Bushing - From stay to Control Arm - 2 per Wheel This bushing is used on vehicles with factory original control arm stays. Depending on model and wheel size, these control arm stays can be of the following lengths: 385mm, 390.5mm, or 396mm. Stays that are 388.5mm in length are replacements with a special inner bushing designed to reduce brake vibration. Cars with 388.5mm stays should use outer bushing #6819057 instead. In addition, if the inner bushings on the suspension (bushing #1273235 for the control arm plus bushing #1329655 for the control arm stay) show any ANY signs of wear, they MUST be replaced at the same time. Otherwise, premature failure of the outer bushings can result, which IS NOT covered under warranty!. Front Suspension - Outer Bushing - From stay to Control Arm - 2 per Wheel This bushing is used on vehicles with factory original control arm stays. Depending on model and wheel size, these control arm stays can be of the following lengths: 385mm, 390.5mm, or 396mm. Stays that are 388.5mm in length are replacements with a special inner bushing designed to reduce brake vibration. Cars with 388.5mm stays should use outer bushing #6819057 instead. In addition, if the inner bushings on the suspension (bushing #1273235 for the control arm plus bushing #1329655 for the control arm stay) show any ANY signs of wear, they MUST be replaced at the same time. Otherwise, premature failure of the outer bushings can result, which IS NOT covered under warranty!. Front Suspension - Outer Bushing - From stay to Control Arm - 2 per Wheel This bushing is used on vehicles that have had had the control arm stays and related bushings replaced with service units designed to reduce brake vibrations. The length of these replacement. Front Suspension - Outer Bushing - From stay to Control Arm - 2 per Wheel - Urethane This bushing is used on vehicles that have had had the control arm stays and related bushings replaced with service units designed to reduce brake vibrations. The length of these replacement control arm stays (#6819079) is 388.5mm, and these replacement bushings (#6819057) contain a different rubber compound than bushing #1359599. WARNING: These parts must be installed only while there is a load on the front suspension, otherwise damage to the bushings may result! In addition, if the inner bushings on the suspension (bushing #1273235 for the control arm plus the non-replaceable bushing incl. w/ control arm stay #6819079) show ANY signs of wear, they MUST be replaced at the same time. Otherwise, premature failure of the outer bushings can result, which IS NOT covered under warranty!. Front Suspension - Outer Bushing - From stay to Control Arm - 2 per Wheel This bushing is used on vehicles that have had had the control arm s. Front Suspension - Outer Bushing - From stay to Control Arm - 2 per Wheel This bushing is used on vehicles with factory original control arm stays. Depending on model and wheel size, these control arm stays can be of the following lengths: 385mm, 390.5mm, or 396mm. Stays that are 388.5mm in length are replacements with a special inner bushing designed to reduce brake vibration. Cars with 388.5mm stays should use outer bushing #6819057 instead. In addition, if the inner bushings on the suspension (bushing #1273235 for the control arm plus bushing #1329655 for the control arm stay) show any ANY signs of wear, they MUST be replaced at the same time. Otherwise, premature failure of the outer bushings can result, which IS NOT covered under warranty!. Front Suspension - Outer Bushing - From stay to Control Arm - 2 per Wheel - Urethane This bushing is used on vehicles that have had had the control arm stays and related bushings replaced with service units designed to reduce brake vibrations. The length of these r.
Brand:Boge
1986 - 2.4L L6
1989 - 2.3L L4
1989 - Base
1989 - GL
Volvo 740 - Upper Control Arm Bushing
Rear suspension- front of support arm
Brand:APA
Location:Upper
1989 - 2.3L L4
1989 - Base
1989 - GL
Volvo 740 - Front > Front Right Control Arm
Front Right Link Arm - Steel STEEL W/ Inner Bushing. PLEASE NOTE : If the Control Arms that need to be replaced are Aluminum, these are no longer available and have been replaced by Steel Control Arms, so you will also need to change the Control Arm Stays, 1-per side, part # 6819079 and the Sway Bar Links, 1-per side, part # 9157725KIT.. Steel
Back to Top
