Nissan Brake Rotors

Featured Models

Home > Shop By Department > Brake Rotors > Nissan Brake Rotors

Acceleration always precedes stopping, where high-speed rate requires powerful and responsive braking. Essentially, the power of the brakes must dominate the strength of the engine in order for the vehicle to efficiently set to a safe halt even under tough situations or hard braking. The same as with the other automobiles, the Nissans are equipped with brakes molded to provide reliable performance. Generation after generation the quality of Nissan brakes is upgraded to match the improved capacities of contemporary Nissan engines.

The Nissan brake rotors which are dubbed as friction surfaces play vital role in the vehicle’s brake system. Installed at the disc brake, rotors are basically circular parallel-faced metal plates unto which the brake pads are clamped and pressed to create heat and friction and oppose the vehicle’s forward motion. Basically, the life and performance of Nissan brake rotors depend on the quality and material of the Nissan brake pads as well as with the brake caliper’s alignment to them. High quality and conditioned brake pads will produce greater amount of friction, and their thickness significantly protects the rotor from cracks and progressive wear-off. Nonetheless, high quality brake pads normally possess semi-metallic materials which cause early damage to the rotors. If the Nissan runs with worn brake pads, it’s the calipers that most probably be contacting the rotors instead of the friction elements, harming then the rotors’ condition.

How would you know if your Nissan brake rotors are problematic? If the brake pedal pulses whenever you step on it, the rotors are most probably rusted, with excessive lateral runout or uneven thickness. Excessive rotor runout can also cause shimmy steering wheel and rattles even if the brakes are not applied. When there’s rapid relining, their surfaces are possibly rough. When the rotors contact the caliper or mount, or the splash shield, you’ll notice grinding or scraping, and squealing with pad wear indicator contacting rotor. When brake fading is experienced, the rotors are severely worn. And if abnormal or uneven pad wear is noticed, the calipers are not properly aligned with the rotors.

It’s normal for your Nissan brake rotors to suffer from defects no matter how good their qualities. And with PartsTrain here, you don’t have to worry when it comes to Nissan brake rotors replacements. Our store carries the best line of aftermarket Nissan brake rotors as well as enormous selection of other Nissan brake parts to restore your automobile’s braking power.

Featured Products Redstuff Ceramic 3000 Brake Pad Set - Ceramic EBC REDSTUFF CERAMIC 3000 SERIES BRAKE PAD SET -- Made from high quality Kevlar fiber-based compound that is enhanced with ceramic particles; Features EBC Brake-In surface coating that provides instant brake efficiency on installation, eliminates the need for installer to bed-in the brakes after fitment and conditions rotor surface to remove glaze and scale; Shimmed, chamfered, and slotted to prevent heat expansion cracks and to reduce brake noise; Strong resistant to fade under load and totally resistant to rotor vibration; Reduces dust by 60 to 90 percent and can be removed easily; Superb brake effect from cold up to race temperature; Engineered for highly tuned vehicles and best for high-speed spirited street driving; With EBC's limited 1-year or 10,000-mile warranty. Brand: EBC Location: Rear P_condition: Install These Brake Pads With The Help Of EBC's Instructional Video P/N E35DVD083 - Sold Separately Material: Ceramic Series: Redstuff Ceramic 3000 Price: $62.96 Redstuff Ceramic 3000 Brake Pad Set - Ceramic EBC REDSTUFF CERAMIC 3000 SERIES BRAKE PAD SET -- Made from high quality Kevlar fiber-based compound that is enhanced with ceramic particles; Features EBC Brake-In surface coating that provides instant brake efficiency on installation, eliminates the need for installer to bed-in the brakes after fitment and conditions rotor surface to remove glaze and scale; Shimmed, chamfered, and slotted to prevent heat expansion cracks and to reduce brake noise; Strong resistant to fade under load and totally resistant to rotor vibration; Reduces dust by 60 to 90 percent and can be removed easily; Superb brake effect from cold up to race temperature; Engineered for highly tuned vehicles and best for high-speed spirited street driving; With EBC's limited 1-year or 10,000-mile warranty. Brand: EBC Location: Front P_condition: Install These Brake Pads With The Help Of EBC's Instructional Video P/N E35DVD083 - Sold Separately Material: Ceramic Series: Redstuff Ceramic 3000 Price: $94.97 Ultimax Brake Pad Set - Semi-metallic EBC ULTIMAX BRAKE PAD SET -- R90 tested and approved; Made from premium quality friction material with part metallic content to greatly reduce chances of brake vibration and improve braking performance; Features EBC Brake-In surface coating that provides instant brake efficiency on installation, eliminates the need for installer to bed-in the brakes after fitment and conditions rotor surface to remove glaze and scale; Shimmed, chamfered, and slotted to prevent heat expansion cracks and to reduce brake noise; With unique powdercoated finish on both pad and back plate giving lifetime resistance to corrosion and preventing moisture ingress; Produces minimal dust and is the perfect choice for the urban or daily driver; Recommended for sedans, light trucks and SUVs; With EBC's limited 1-year or 10,000-mile warranty. Brand: EBC Location: Rear P_condition: Install These Brake Pads With The Help Of EBC's Instructional Video P/N E35DVD083 - Sold Separately Material: Semi-metallic Series: Ultimax Price: $52.28 Ultimax Brake Pad Set - Semi-metallic EBC ULTIMAX BRAKE PAD SET -- R90 tested and approved; Made from premium quality friction material with part metallic content to greatly reduce chances of brake vibration and improve braking performance; Features EBC Brake-In surface coating that provides instant brake efficiency on installation, eliminates the need for installer to bed-in the brakes after fitment and conditions rotor surface to remove glaze and scale; Shimmed, chamfered, and slotted to prevent heat expansion cracks and to reduce brake noise; With unique powdercoated finish on both pad and back plate giving lifetime resistance to corrosion and preventing moisture ingress; Produces minimal dust and is the perfect choice for the urban or daily driver; Recommended for sedans, light trucks and SUVs; With EBC's limited 1-year or 10,000-mile warranty. Brand: EBC Location: Front P_condition: Install These Brake Pads With The Help Of EBC's Instructional Video P/N E35DVD083 - Sold Separately Material: Semi-metallic Series: Ultimax Price: $48.82 Ultimax Brake Pad Set - Semi-metallic EBC ULTIMAX BRAKE PAD SET -- R90 tested and approved; Made from premium quality friction material with part metallic content to greatly reduce chances of brake vibration and improve braking performance; Features EBC Brake-In surface coating that provides instant brake efficiency on installation, eliminates the need for installer to bed-in the brakes after fitment and conditions rotor surface to remove glaze and scale; Shimmed, chamfered, and slotted to prevent heat expansion cracks and to reduce brake noise; With unique powdercoated finish on both pad and back plate giving lifetime resistance to corrosion and preventing moisture ingress; Produces minimal dust and is the perfect choice for the urban or daily driver; Recommended for sedans, light trucks and SUVs; With EBC's limited 1-year or 10,000-mile warranty. Brand: EBC Location: Front P_condition: Install These Brake Pads With The Help Of EBC's Instructional Video P/N E35DVD083 - Sold Separately Material: Semi-metallic Series: Ultimax Price: $51.58