Brake Rotors
Get the right Brake Rotors from Partstrain! Select your vehicle to ensure that you will find the right parts with a perfect fit.
| Browse our Wide Selection of Auto Car/Truck Parts |
|
|
The brake system in modern vehicles has been developed and refined for more than 100 years and finally, it has turn out to be highly efficient and reliable. The usual braking system is made up of disk brakes in the front and either drum or disk brakes in the rear wheels. A set of hoses and tubes link the brakes at every wheel to each other and to the vehicle’s master cylinder.
On a disk brake system, the fluid released by the master cylinder is pressed into a brake caliper where it pushes against a piston. Consequently, the piston squeezes two frictional materials called brake pads against the rotor that is attached to the vehicle’s wheel, causing it to slow down or to halt. The brake pads, brake rotor, brake caliper and the caliper support are the major parts of a disk brake system.
Those flat, disk-like plates providing the disc brake system with a friction surface are called brake rotors. As soon as hydraulic pressure is driven to the caliper, the brake pads which are pressed on both sides of the rotor generate heat and friction. Some vehicle rotors contain cooling fins stuck between both faces and they are dubbed as “vented” rotors. The brake rotors are made from iron and they feature highly machined friction surfaces.
Just like the brake pads, brake rotors also wear out in the long run. They too experience some wear which usually crop up by means of groves and ridges where the pads touch against it. Since the pad comes in contact with the rotor, they share the same wear pattern. When new brake pads are mounted, you should make sure that the brake rotors are resurfaced. This way, the new pads can have smooth surface to get in touch with. However, only a small quantity of substances making up the rotor can be machined off before it will be unfit for usage.
On every vehicle rotor, there a minimum measurement of thickness stamped unto it. Once the thickness of your vehicle’s brake rotor goes down the legal minimum, it will not be able to hold the high heat normally generated by the brakes. The result will be brake “fade” which greatly reduces their braking capability up to the point when you may not be able to stop anymore. This is the last thing you want to happen while driving, right? Hence, it is always good to have your brake rotors inspected regularly and replaced if needed. For high-quality replacement brake rotors, Parts Train is one of the best places to go.
 Featured Products |
Redstuff Ceramic 3000 Brake Pad Set - Ceramic
EBC REDSTUFF CERAMIC 3000 SERIES BRAKE PAD SET -- Made from high quality Kevlar fiber-based compound that is enhanced with ceramic particles; Features EBC Brake-In surface coating that provides instant brake efficiency on installation, eliminates the need for installer to bed-in the brakes after fitment and conditions rotor surface to remove glaze and scale; Shimmed, chamfered, and slotted to prevent heat expansion cracks and to reduce brake noise; Strong resistant to fade under load and totally resistant to rotor vibration; Reduces dust by 60 to 90 percent and can be removed easily; Superb brake effect from cold up to race temperature; Engineered for highly tuned vehicles and best for high-speed spirited street driving; With EBC's limited 1-year or 10,000-mile warranty.
- Brand: EBC
- Location: Rear
- P_condition: Install These Brake Pads With The Help Of EBC's Instructional Video P/N E35DVD083 - Sold Separately
- Material: Ceramic
- Series: Redstuff Ceramic 3000
|
Redstuff Ceramic 3000 Brake Pad Set - Ceramic
EBC REDSTUFF CERAMIC 3000 SERIES BRAKE PAD SET -- Made from high quality Kevlar fiber-based compound that is enhanced with ceramic particles; Features EBC Brake-In surface coating that provides instant brake efficiency on installation, eliminates the need for installer to bed-in the brakes after fitment and conditions rotor surface to remove glaze and scale; Shimmed, chamfered, and slotted to prevent heat expansion cracks and to reduce brake noise; Strong resistant to fade under load and totally resistant to rotor vibration; Reduces dust by 60 to 90 percent and can be removed easily; Superb brake effect from cold up to race temperature; Engineered for highly tuned vehicles and best for high-speed spirited street driving; With EBC's limited 1-year or 10,000-mile warranty.
- Brand: EBC
- Location: Rear
- P_condition: Install These Brake Pads With The Help Of EBC's Instructional Video P/N E35DVD083 - Sold Separately
- Material: Ceramic
- Series: Redstuff Ceramic 3000
|
Ultimax Brake Pad Set - Semi-metallic
EBC ULTIMAX BRAKE PAD SET -- R90 tested and approved; Made from premium quality friction material with part metallic content to greatly reduce chances of brake vibration and improve braking performance; Features EBC Brake-In surface coating that provides instant brake efficiency on installation, eliminates the need for installer to bed-in the brakes after fitment and conditions rotor surface to remove glaze and scale; Shimmed, chamfered, and slotted to prevent heat expansion cracks and to reduce brake noise; With unique powdercoated finish on both pad and back plate giving lifetime resistance to corrosion and preventing moisture ingress; Produces minimal dust and is the perfect choice for the urban or daily driver; Recommended for sedans, light trucks and SUVs; With EBC's limited 1-year or 10,000-mile warranty.
- Brand: EBC
- Location: Front
- P_condition: Install These Brake Pads With The Help Of EBC's Instructional Video P/N E35DVD083 - Sold Separately
- Material: Semi-metallic
- Series: Ultimax
|
Ultimax Brake Pad Set - Semi-metallic
EBC ULTIMAX BRAKE PAD SET -- R90 tested and approved; Made from premium quality friction material with part metallic content to greatly reduce chances of brake vibration and improve braking performance; Features EBC Brake-In surface coating that provides instant brake efficiency on installation, eliminates the need for installer to bed-in the brakes after fitment and conditions rotor surface to remove glaze and scale; Shimmed, chamfered, and slotted to prevent heat expansion cracks and to reduce brake noise; With unique powdercoated finish on both pad and back plate giving lifetime resistance to corrosion and preventing moisture ingress; Produces minimal dust and is the perfect choice for the urban or daily driver; Recommended for sedans, light trucks and SUVs; With EBC's limited 1-year or 10,000-mile warranty.
- Brand: EBC
- Location: Rear
- P_condition: Install These Brake Pads With The Help Of EBC's Instructional Video P/N E35DVD083 - Sold Separately
- Material: Semi-metallic
- Series: Ultimax
|
Redstuff Ceramic 3000 Brake Pad Set - Ceramic
EBC REDSTUFF CERAMIC 3000 SERIES BRAKE PAD SET -- Made from high quality Kevlar fiber-based compound that is enhanced with ceramic particles; Features EBC Brake-In surface coating that provides instant brake efficiency on installation, eliminates the need for installer to bed-in the brakes after fitment and conditions rotor surface to remove glaze and scale; Shimmed, chamfered, and slotted to prevent heat expansion cracks and to reduce brake noise; Strong resistant to fade under load and totally resistant to rotor vibration; Reduces dust by 60 to 90 percent and can be removed easily; Superb brake effect from cold up to race temperature; Engineered for highly tuned vehicles and best for high-speed spirited street driving; With EBC's limited 1-year or 10,000-mile warranty.
- Brand: EBC
- Location: Front
- P_condition: Install These Brake Pads With The Help Of EBC's Instructional Video P/N E35DVD083 - Sold Separately
- Material: Ceramic
- Series: Redstuff Ceramic 3000
|
|
|
