Plymouth Brake Disc |
You smash the brakes upon seeing a child that suddenly crossed the road. You react with the same impulse when another vehicle comes to your lane just almost a foot apart from your vehicle’s front bumper. When the motorist in front of you hit his brakes as if realizing that he’s almost at the dead end of a steep cliff, you’d as well step on your brakes to try to avoid hitting his rear. In such emergency situations, you have nothing else to rely on to but the performance of your automobile’s brakes. If unluckily these components fail, you’d end up in an accident that might actually cost lives. Dreadful things that resulted from braking trouble can however be avoided simply by making sure that the Plymouth disc brake installed at every wheel of your Plymouth unit is of high quality and at their utmost conditions.
Brake disc also known as brake rotor is the primary part of a disc brake system. It’s a plate or dish that directly connects to the wheel’s axle, enabling the system to interfere to the wheels’ spinning motion when applied. A Plymouth can be equipped with either two or four brake discs. If it’s a front-wheel drive unit, each of its front wheels carry one disc, whereas the rear wheels are typically equipped with drum brakes. An all-wheel drive Plymouth on the other hand is incorporated with four, one for every wheel.
Plymouth brake discs come in various designs, just the same with those that are utilized by other vehicles. One is the ventilated disc, the type that features hallowed fins to allow heat dissipation while braking. Another is the slotted type, the design that’s rarely used due to its capacity of making the brake pads wear-out more quickly. Nonetheless, the slots in its surface help prevent water build-up between the disc and the pads. Significantly, vertification is avoided from posing further trouble to the system. These slots also serve as portal for dirt, dust and other solid components which could affect the braking efficiency. There’s as well the brake disc that’s molded with cross drilling. This type of disc assures excellent braking power. But then Plymouths cannot have it, because it’s purposely engineered for race cars.
Technically, the brake discs are able to put a vehicle to a stop due to the help of the rest of the disc brake systems’ vital components. Upon applying pressure to the brake pedal, the lever will activate the master cylinder which will subsequently force the brake or hydraulic fluid to travel towards the brake caliper. An assembly of hoses serves as channel through which the brake fluid flows. While making its way to the calipers of each wheel, this hydraulic component creates pressure which in turn pushes the pistons inside the calipers. At each caliper, a brake pad is installed up face the disc or rotor. When the brake fluid reaches the calipers, it will enable the pads to contact the disc for the actual friction generation. |
|
 Featured Products |
Plymouth Laser - Slotted Brake Disc
"BREMBO SPORT SLOTTED BRAKE ROTOR SET, FRONT -- Made Of High Carbon Cast Iron, Provides Excellent Stopping Power, Maximum Performance, And Increased Comfort, Exceeds OE Specifications, Features Slotted Grooves That Expel Heat And Dust For Superior Braking Ability, Resists Corrosion, Easy Installation"
- Brand: Brembo Sport
- Series: Slotted
- Type: Slotted
- 1994,1993 - 4Cyl 2.0L "Gas, FI, Turbocharged, VIN "F" RS
|
Plymouth Laser - Cross-drilled Brake Disc
"BREMBO SPORT CROSS DRILLED BRAKE ROTOR SET, FRONT -- Made Of High Carbon Cast Iron, Provides Excellent Stopping Power, Maximum Performance, And Increased Comfort, Exceeds OE Specifications, Features Cross-Drilled Holes That Dissipate Heat Quickly And Brake Dust To Maximize Braking Ability, Resists Corrosion, Easy Installation"
- Brand: Brembo Sport
- Series: Cross-drilled
- Type: Cross Drilled
- 1994,1993 - 4Cyl 2.0L "Gas, FI, Turbocharged, VIN "F" RS
|
Plymouth Laser - Slotted Brake Disc
"BREMBO SPORT SLOTTED BRAKE ROTOR SET, FRONT -- Made Of High Carbon Cast Iron, Provides Excellent Stopping Power, Maximum Performance, And Increased Comfort, Exceeds OE Specifications, Features Slotted Grooves That Expel Heat And Dust For Superior Braking Ability, Resists Corrosion, Easy Installation"
- Brand: Brembo Sport
- Series: Slotted
- 1993 - 4Cyl 2.0L "Gas, FI, VIN "E" RS
- 1994,1993 - 4Cyl 1.8L "Gas, FI, VIN "B" Base
- 1994,1993 - 4Cyl 2.0L "Gas, FI, Turbocharged, VIN "F" RS
|
Plymouth Laser - Slotted Brake Disc
"BREMBO SPORT SLOTTED BRAKE ROTOR SET, FRONT -- Made Of High Carbon Cast Iron, Provides Excellent Stopping Power, Maximum Performance, And Increased Comfort, Exceeds OE Specifications, Features Slotted Grooves That Expel Heat And Dust For Superior Braking Ability, Resists Corrosion, Easy Installation"
- Brand: Brembo Sport
- Series: Slotted
- 1994,1993 - 4Cyl 1.8L "Gas, FI, VIN "B" Base
- 1994,1993 - 4Cyl 2.0L "Gas, FI, VIN "E" RS
|
Plymouth Laser - Slotted Brake Disc
"BREMBO SPORT SLOTTED BRAKE ROTOR SET, FRONT -- Made Of High Carbon Cast Iron, Provides Excellent Stopping Power, Maximum Performance, And Increased Comfort, Exceeds OE Specifications, Features Slotted Grooves That Expel Heat And Dust For Superior Braking Ability, Resists Corrosion, Easy Installation"
- Brand: Brembo Sport
- Series: Slotted
- 1990 - 4Cyl 1.8L "Gas, FI, VIN "T" RS
- 1990 - 4Cyl 2.0L "Gas, FI, VIN "R" RS
- 1992,1991,1990 - 4Cyl 1.8L "Gas, FI, VIN "T" Base
- 1992,1991,1990 - 4Cyl 2.0L "Gas, FI, Turbocharged, VIN "U" RS
|
|
|
Back to Top
