Ball Joint Kit
AC DELCO CONTROL ARM BALL JOINT KIT -- Unlike other control arm ball joints with stamped housing, the ball joint in this kit features precision-machined housing and a low-friction bearing design for easier steering and better run-to-center; With high-resistant polyurethane boots that eliminate contaminants while resisting damage; Case-hardened and coated for corrosion resistance, strength and durability; 2 required per vehicle.
- Brand: AC Delco
- Location: Front, Lower
|
Ball Joint Service Tool Kit
OTC BALL JOINT SERVICE KIT -- Includes one installing cup, one receiving cup, and one installing adapter; With 2-3/4 in. ID x 3 in. OD, 2-1/4 in. ID x 2-1/2 in. OD, and 1-3/4 in. ID x 2 in. OD receiver tubes; Removes and installs press-fit parts such as ball joints, universal joints, and truck brake anchor pins.
|
Ball Joint Spanner
OTC BALL JOINT SPANNER WRENCH -- This tool is designed for the removal and installation of ball joint adjusting sleeves on 1/2-, 3/4-, and 1-ton Dana 44 open yoke front axles; It permits easy torquing with 1 in. socket for correct upper ball-joint preload.
|
Ball Joint Separator
LISLE BALL JOINT SEPARATOR -- 15/16 in. opening; This heavy duty tool is used to replace worn out ball joints and to remove CV drive shafts on FWD vehicles; Comes skin-packed.
|
C-Clamp Ball Joint Adapter
LISLE BALL JOINT ADAPTER SET -- A set of four adapters that easily removes the ball joint from the control arm and presses in a new ball joint without damaging the ball joint stud or dust boot; Allows the job to be done with the wheel knuckle still on the vehicle; Use with part number 43620 or any standard C-Frame.
|
