Subaru DL Axle Assembly |
 |
|
|
|
|
|
|
|
|
|
|
|
|
Home >
Shop By Department >
Axle Assembly >
Subaru >
Subaru DL Axle Assembly |
|
 Featured Products |
Subaru DL - Front Axle Assembly
Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!. w/ Carburated Engine Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!. w/ Fuel Injected Engine Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!. Vehicles using this axle must have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!. w/ Carburated Engine Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!. w/ Fuel Injected Engine Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!.. 23 Spline I.B.
- Brand: EMPI
- Location: Front
- 1985 - FWD
- 1989,1988,1987,1986 - Automatic FWD
- 1989,1988,1987,1986 - Standard FWD
- 1989,1988,1987,1986,1985 - 4WD
|
Subaru DL - Front Axle Assembly
Vehicles using this axle must have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!. Vehicles using this axle must have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!.
- Brand: EMPI
- Location: Front
|
Subaru DL - Front Axle Assembly
Vehicles using this axle must have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!. w/ Carburated Engine Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!. w/ Fuel Injected Engine Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!. w/ Fuel Injected Engine Vehicles using this axle MUST have the original heat shield around the y-pipe and front catalytic converter and have the fuel mixture properly adjusted. Missing heat shields or improperly set fuel mixture can cause the inner axle boots to overheat and eventually split, resulting in loss of lubricant and/or contamination of the inner CV joint, leading to failure of the joint. FAILURES OF THIS NATURE ARE NOT COVERED BY THE AXLE MANUFACTURER'S WARRANTY!!!!
- Brand: FEQ
- Location: Front
- 1985 - FWD
- 1989,1988,1987,1986 - Automatic FWD
- 1989,1988,1987,1986 - Standard FWD
- 1989,1988,1987,1986,1985 - 4WD
|
Subaru DL - CV Axle Assembly
"CVU AXLE ASSEMBLY, PASSENGER SIDE -- A High Quality Direct Fit Replacement, Remanufactured To OEM Specifications, With Manufacturer's Limited 7-Year Or 70,000-Mile Warranty"
- 1980,1981,1982,1983,1984 - 4Cyl 1.6L Base
- 1980,1981,1982,1983,1984 - 4Cyl 1.8L Base
|
Subaru DL - CV Axle Assembly
"CVU AXLE ASSEMBLY, PASSENGER SIDE -- A High Quality Direct Fit Replacement, Remanufactured To OEM Specifications, With Manufacturer's Limited 7-Year Or 70,000-Mile Warranty"
- 1978,1979 - 4Cyl 1.6L Base
|
|
|
| 1989, 1988, 1987, 1986, 1985, 1984, 1983, 1982, 1981, 1980, 1979, 1978, 1977, 1976, 1975, 1974 |
|
|
|
|
|
|
|
Back to Top
